Logo Search packages:      
Sourcecode: pcmcia-cs version File versions  Download package

smc91c92_cs.c

/*======================================================================

    A PCMCIA ethernet driver for SMC91c92-based cards.

    This driver supports Megahertz PCMCIA ethernet cards; and
    Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem
    multifunction cards.

    Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net

    smc91c92_cs.c 1.123 2003/08/25 15:57:41

    This driver contains code written by Donald Becker
    (becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au),
    David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman
    (erik@vt.edu).  Donald wrote the SMC 91c92 code using parts of
    Erik's SMC 91c94 driver.  Rowan wrote a similar driver, and I've
    incorporated some parts of his driver here.  I (Dave) wrote most
    of the PCMCIA glue code, and the Ositech support code.  Kelly
    Stephens (kstephen@holli.com) added support for the Motorola
    Mariner, with help from Allen Brost.

    This software may be used and distributed according to the terms of
    the GNU General Public License, incorporated herein by reference.

======================================================================*/

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/crc32.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>

#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>

#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>

/* Ositech Seven of Diamonds firmware */
#include "ositech.h"

/*====================================================================*/

static char *if_names[] = { "auto", "10baseT", "10base2"};

/* Module parameters */

MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver");
MODULE_LICENSE("GPL");

#define INT_MODULE_PARM(n, v) static int n = v; MODULE_PARM(n, "i")

/*
  Transceiver/media type.
   0 = auto
   1 = 10baseT (and autoselect if #define AUTOSELECT),
   2 = AUI/10base2,
*/
INT_MODULE_PARM(if_port, 0);

/* Bit map of interrupts to choose from. */
INT_MODULE_PARM(irq_mask, 0xdeb8);
static int irq_list[4] = { -1 };
MODULE_PARM(irq_list, "1-4i");

#ifdef PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
static const char *version =
"smc91c92_cs.c 0.09 1996/8/4 Donald Becker, becker@scyld.com.\n";
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
#else
#define DEBUG(n, args...)
#endif

/*====================================================================*/

/* Operational parameter that usually are not changed. */

/* Time in jiffies before concluding Tx hung */
#define TX_TIMEOUT            ((400*HZ)/1000)

/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
#define INTR_WORK       4

/* Times to check the check the chip before concluding that it doesn't
   currently have room for another Tx packet. */
#define MEMORY_WAIT_TIME            8

static dev_info_t dev_info = "smc91c92_cs";

static dev_link_t *dev_list;

struct smc_private {
    dev_link_t                link;
    struct net_device         dev;
    u_short             manfid;
    u_short             cardid;
    struct net_device_stats   stats;
    dev_node_t                node;
    struct sk_buff            *saved_skb;
    int                       packets_waiting;
    caddr_t             base;
    u_short             cfg;
    struct timer_list         media;
    int                       watchdog, tx_err;
    u_short             media_status;
    u_short             fast_poll;
    u_short             link_status;
    int                       phy_id;
    int                       duplex;
    int                       rx_ovrn;
};

/* Special definitions for Megahertz multifunction cards */
#define MEGAHERTZ_ISR         0x0380

/* Special function registers for Motorola Mariner */
#define MOT_LAN               0x0000
#define MOT_UART        0x0020
#define MOT_EEPROM            0x20

#define MOT_NORMAL \
(COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA)

/* Special function registers for Ositech cards */
#define OSITECH_AUI_CTL       0x0c
#define OSITECH_PWRDOWN       0x0d
#define OSITECH_RESET         0x0e
#define OSITECH_ISR           0x0f
#define OSITECH_AUI_PWR       0x0c
#define OSITECH_RESET_ISR     0x0e

#define OSI_AUI_PWR           0x40
#define OSI_LAN_PWRDOWN       0x02
#define OSI_MODEM_PWRDOWN     0x01
#define OSI_LAN_RESET         0x02
#define OSI_MODEM_RESET       0x01

/* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */
#define     BANK_SELECT       14          /* Window select register. */
#define SMC_SELECT_BANK(x)  { outw(x, ioaddr + BANK_SELECT); }

/* Bank 0 registers. */
#define     TCR         0     /* transmit control register */
#define      TCR_CLEAR  0     /* do NOTHING */
#define  TCR_ENABLE     0x0001      /* if this is 1, we can transmit */
#define      TCR_PAD_EN 0x0080      /* pads short packets to 64 bytes */
#define  TCR_MONCSN     0x0400  /* Monitor Carrier. */
#define  TCR_FDUPLX     0x0800  /* Full duplex mode. */
#define      TCR_NORMAL TCR_ENABLE | TCR_PAD_EN

#define EPH       2     /* Ethernet Protocol Handler report. */
#define  EPH_TX_SUC     0x0001
#define  EPH_SNGLCOL    0x0002
#define  EPH_MULCOL     0x0004
#define  EPH_LTX_MULT   0x0008
#define  EPH_16COL      0x0010
#define  EPH_SQET 0x0020
#define  EPH_LTX_BRD    0x0040
#define  EPH_TX_DEFR    0x0080
#define  EPH_LAT_COL    0x0200
#define  EPH_LOST_CAR   0x0400
#define  EPH_EXC_DEF    0x0800
#define  EPH_CTR_ROL    0x1000
#define  EPH_RX_OVRN    0x2000
#define  EPH_LINK_OK    0x4000
#define  EPH_TX_UNRN    0x8000
#define MEMINFO         8     /* Memory Information Register */
#define MEMCFG          10    /* Memory Configuration Register */

/* Bank 1 registers. */
#define CONFIG                0
#define  CFG_MII_SELECT       0x8000      /* 91C100 only */
#define  CFG_NO_WAIT          0x1000
#define  CFG_FULL_STEP        0x0400
#define  CFG_SET_SQLCH        0x0200
#define  CFG_AUI_SELECT       0x0100
#define  CFG_16BIT            0x0080
#define  CFG_DIS_LINK         0x0040
#define  CFG_STATIC           0x0030
#define  CFG_IRQ_SEL_1        0x0004
#define  CFG_IRQ_SEL_0        0x0002
#define BASE_ADDR       2
#define     ADDR0             4
#define     GENERAL                 10
#define     CONTROL                 12
#define  CTL_STORE            0x0001
#define  CTL_RELOAD           0x0002
#define  CTL_EE_SELECT        0x0004
#define  CTL_TE_ENABLE        0x0020
#define  CTL_CR_ENABLE        0x0040
#define  CTL_LE_ENABLE        0x0080
#define  CTL_AUTO_RELEASE     0x0800
#define      CTL_POWERDOWN          0x2000

/* Bank 2 registers. */
#define MMU_CMD         0
#define      MC_ALLOC   0x20        /* or with number of 256 byte packets */
#define      MC_RESET   0x40
#define  MC_RELEASE     0x80        /* remove and release the current rx packet */
#define  MC_FREEPKT     0xA0        /* Release packet in PNR register */
#define  MC_ENQUEUE     0xC0  /* Enqueue the packet for transmit */
#define     PNR_ARR           2
#define FIFO_PORTS      4
#define  FP_RXEMPTY     0x8000
#define     POINTER           6
#define  PTR_AUTO_INC   0x0040
#define  PTR_READ 0x2000
#define      PTR_AUTOINC      0x4000
#define      PTR_RCV    0x8000
#define     DATA_1            8
#define     INTERRUPT   12
#define  IM_RCV_INT           0x1
#define      IM_TX_INT        0x2
#define      IM_TX_EMPTY_INT  0x4
#define      IM_ALLOC_INT           0x8
#define      IM_RX_OVRN_INT         0x10
#define      IM_EPH_INT       0x20

#define     RCR         4
enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002,
           RxEnable = 0x0100, RxStripCRC = 0x0200};
#define  RCR_SOFTRESET  0x8000      /* resets the chip */
#define      RCR_STRIP_CRC    0x200 /* strips CRC */
#define  RCR_ENABLE     0x100 /* IFF this is set, we can receive packets */
#define  RCR_ALMUL      0x4   /* receive all multicast packets */
#define      RCR_PROMISC      0x2   /* enable promiscuous mode */

/* the normal settings for the RCR register : */
#define      RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE)
#define  RCR_CLEAR      0x0         /* set it to a base state */
#define     COUNTER           6

/* BANK 3 -- not the same values as in smc9194! */
#define     MULTICAST0  0
#define     MULTICAST2  2
#define     MULTICAST4  4
#define     MULTICAST6  6
#define MGMT      8
#define REVISION  0x0a

/* Transmit status bits. */
#define TS_SUCCESS 0x0001
#define TS_16COL   0x0010
#define TS_LATCOL  0x0200
#define TS_LOSTCAR 0x0400

/* Receive status bits. */
#define RS_ALGNERR      0x8000
#define RS_BADCRC 0x2000
#define RS_ODDFRAME     0x1000
#define RS_TOOLONG      0x0800
#define RS_TOOSHORT     0x0400
#define RS_MULTICAST    0x0001
#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)

#define set_bits(v, p) outw(inw(p)|(v), (p))
#define mask_bits(v, p) outw(inw(p)&(v), (p))

/*====================================================================*/

static dev_link_t *smc91c92_attach(void);
static void smc91c92_detach(dev_link_t *);
static void smc91c92_config(dev_link_t *link);
static void smc91c92_release(u_long arg);
static int smc91c92_event(event_t event, int priority,
                    event_callback_args_t *args);

static int smc_open(struct net_device *dev);
static int smc_close(struct net_device *dev);
static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static void smc_tx_timeout(struct net_device *dev);
static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void smc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static void smc_rx(struct net_device *dev);
static struct net_device_stats *smc_get_stats(struct net_device *dev);
static void set_rx_mode(struct net_device *dev);
static int s9k_config(struct net_device *dev, struct ifmap *map);
static void smc_set_xcvr(struct net_device *dev, int if_port);
static void smc_reset(struct net_device *dev);
static void media_check(u_long arg);
static void mdio_sync(ioaddr_t addr);
static int mdio_read(struct net_device *dev, int phy_id, int loc);
static void mdio_write(struct net_device *dev, int phy_id, int loc, int value);

/*======================================================================

    This bit of code is used to avoid unregistering network devices
    at inappropriate times.  2.2 and later kernels are fairly picky
    about when this can happen.

======================================================================*/

static void flush_stale_links(void)
{
    dev_link_t *link, *next;
    for (link = dev_list; link; link = next) {
      next = link->next;
      if (link->state & DEV_STALE_LINK)
          smc91c92_detach(link);
    }
}

/*====================================================================*/

static void cs_error(client_handle_t handle, int func, int ret)
{
    error_info_t err = { func, ret };
    CardServices(ReportError, handle, &err);
}

/*======================================================================

  smc91c92_attach() creates an "instance" of the driver, allocating
  local data structures for one device.  The device is registered
  with Card Services.

======================================================================*/

static dev_link_t *smc91c92_attach(void)
{
    client_reg_t client_reg;
    struct smc_private *smc;
    dev_link_t *link;
    struct net_device *dev;
    int i, ret;

    DEBUG(0, "smc91c92_attach()\n");
    flush_stale_links();

    /* Create new ethernet device */
    smc = kmalloc(sizeof(struct smc_private), GFP_KERNEL);
    if (!smc) return NULL;
    memset(smc, 0, sizeof(struct smc_private));
    link = &smc->link; dev = &smc->dev;

    init_timer(&link->release);
    link->release.function = &smc91c92_release;
    link->release.data = (u_long)link;
    link->io.NumPorts1 = 16;
    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
    link->io.IOAddrLines = 4;
    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
    if (irq_list[0] == -1)
      link->irq.IRQInfo2 = irq_mask;
    else
      for (i = 0; i < 4; i++)
          link->irq.IRQInfo2 |= 1 << irq_list[i];
    link->irq.Handler = &smc_interrupt;
    link->conf.Attributes = CONF_ENABLE_IRQ;
    link->conf.Vcc = 50;
    link->conf.IntType = INT_MEMORY_AND_IO;

    /* The SMC91c92-specific entries in the device structure. */
    dev->hard_start_xmit = &smc_start_xmit;
    dev->get_stats = &smc_get_stats;
    dev->set_config = &s9k_config;
    dev->set_multicast_list = &set_rx_mode;
    ether_setup(dev);
    init_dev_name(dev, smc->node);
    dev->open = &smc_open;
    dev->stop = &smc_close;
    dev->do_ioctl = &smc_ioctl;
#ifdef HAVE_TX_TIMEOUT
    dev->tx_timeout = smc_tx_timeout;
    dev->watchdog_timeo = TX_TIMEOUT;
#endif
    dev->priv = link->priv = link->irq.Instance = smc;

    /* Register with Card Services */
    link->next = dev_list;
    dev_list = link;
    client_reg.dev_info = &dev_info;
    client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
    client_reg.EventMask = CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
      CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
      CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
    client_reg.event_handler = &smc91c92_event;
    client_reg.Version = 0x0210;
    client_reg.event_callback_args.client_data = link;
    ret = CardServices(RegisterClient, &link->handle, &client_reg);
    if (ret != 0) {
      cs_error(link->handle, RegisterClient, ret);
      smc91c92_detach(link);
      return NULL;
    }

    return link;
} /* smc91c92_attach */

/*======================================================================

    This deletes a driver "instance".  The device is de-registered
    with Card Services.  If it has been released, all local data
    structures are freed.  Otherwise, the structures will be freed
    when the device is released.

======================================================================*/

static void smc91c92_detach(dev_link_t *link)
{
    struct smc_private *smc = link->priv;
    dev_link_t **linkp;

    DEBUG(0, "smc91c92_detach(0x%p)\n", link);

    /* Locate device structure */
    for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
      if (*linkp == link) break;
    if (*linkp == NULL)
      return;

    del_timer(&link->release);
    if (link->state & DEV_CONFIG) {
      smc91c92_release((u_long)link);
      if (link->state & DEV_STALE_CONFIG) {
          link->state |= DEV_STALE_LINK;
          return;
      }
    }

    if (link->handle)
      CardServices(DeregisterClient, link->handle);

    /* Unlink device structure, free bits */
    *linkp = link->next;
    if (link->dev)
      unregister_netdev(&smc->dev);
    kfree(smc);

} /* smc91c92_detach */

/*====================================================================*/

static int cvt_ascii_address(struct net_device *dev, char *s)
{
    int i, j, da, c;

    if (strlen(s) != 12)
      return -1;
    for (i = 0; i < 6; i++) {
      da = 0;
      for (j = 0; j < 2; j++) {
          c = *s++;
          da <<= 4;
          da += ((c >= '0') && (c <= '9')) ?
            (c - '0') : ((c & 0x0f) + 9);
      }
      dev->dev_addr[i] = da;
    }
    return 0;
}

/*====================================================================*/

static int get_tuple(int fn, client_handle_t handle, tuple_t *tuple,
                 cisparse_t *parse)
{
    int i;
    i = CardServices(fn, handle, tuple);
    if (i != CS_SUCCESS) return i;
    i = CardServices(GetTupleData, handle, tuple);
    if (i != CS_SUCCESS) return i;
    return CardServices(ParseTuple, handle, tuple, parse);
}

#define first_tuple(a, b, c) get_tuple(GetFirstTuple, a, b, c)
#define next_tuple(a, b, c) get_tuple(GetNextTuple, a, b, c)

/*======================================================================

    Configuration stuff for Megahertz cards

    mhz_3288_power() is used to power up a 3288's ethernet chip.
    mhz_mfc_config() handles socket setup for multifunction (1144
    and 3288) cards.  mhz_setup() gets a card's hardware ethernet
    address.

======================================================================*/

static int mhz_3288_power(dev_link_t *link)
{
    struct smc_private *smc = link->priv;
    u_char tmp;

    /* Read the ISR twice... */
    readb(smc->base+MEGAHERTZ_ISR);
    udelay(5);
    readb(smc->base+MEGAHERTZ_ISR);

    /* Pause 200ms... */
    mdelay(200);

    /* Now read and write the COR... */
    tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR);
    udelay(5);
    writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR);

    return 0;
}

static int mhz_mfc_config(dev_link_t *link)
{
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    tuple_t tuple;
    cisparse_t parse;
    u_char buf[255];
    cistpl_cftable_entry_t *cf = &parse.cftable_entry;
    win_req_t req;
    memreq_t mem;
    int i, k;

    link->conf.Attributes |= CONF_ENABLE_SPKR;
    link->conf.Status = CCSR_AUDIO_ENA;
    link->irq.Attributes =
      IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
    link->io.IOAddrLines = 16;
    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
    link->io.NumPorts2 = 8;

    tuple.Attributes = tuple.TupleOffset = 0;
    tuple.TupleData = (cisdata_t *)buf;
    tuple.TupleDataMax = sizeof(buf);
    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;

    i = first_tuple(link->handle, &tuple, &parse);
    /* The Megahertz combo cards have modem-like CIS entries, so
       we have to explicitly try a bunch of port combinations. */
    while (i == CS_SUCCESS) {
      link->conf.ConfigIndex = cf->index;
      link->io.BasePort2 = cf->io.win[0].base;
      for (k = 0; k < 0x400; k += 0x10) {
          if (k & 0x80) continue;
          link->io.BasePort1 = k ^ 0x300;
          i = CardServices(RequestIO, link->handle, &link->io);
          if (i == CS_SUCCESS) break;
      }
      if (i == CS_SUCCESS) break;
      i = next_tuple(link->handle, &tuple, &parse);
    }
    if (i != CS_SUCCESS)
      return i;
    dev->base_addr = link->io.BasePort1;

    /* Allocate a memory window, for accessing the ISR */
    req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
    req.Base = req.Size = 0;
    req.AccessSpeed = 0;
    link->win = (window_handle_t)link->handle;
    i = CardServices(RequestWindow, &link->win, &req);
    if (i != CS_SUCCESS)
      return i;
    smc->base = ioremap(req.Base, req.Size);
    mem.CardOffset = mem.Page = 0;
    if (smc->manfid == MANFID_MOTOROLA)
      mem.CardOffset = link->conf.ConfigBase;
    i = CardServices(MapMemPage, link->win, &mem);

    if ((i == CS_SUCCESS)
      && (smc->manfid == MANFID_MEGAHERTZ)
      && (smc->cardid == PRODID_MEGAHERTZ_EM3288))
      mhz_3288_power(link);

    return i;
}

static int mhz_setup(dev_link_t *link)
{
    client_handle_t handle = link->handle;
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    tuple_t tuple;
    cisparse_t parse;
    u_char buf[255], *station_addr;

    tuple.Attributes = tuple.TupleOffset = 0;
    tuple.TupleData = buf;
    tuple.TupleDataMax = sizeof(buf);

    /* Read the station address from the CIS.  It is stored as the last
       (fourth) string in the Version 1 Version/ID tuple. */
    tuple.DesiredTuple = CISTPL_VERS_1;
    if (first_tuple(handle, &tuple, &parse) != CS_SUCCESS)
      return -1;
    /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
    if (next_tuple(handle, &tuple, &parse) != CS_SUCCESS)
      first_tuple(handle, &tuple, &parse);
    if (parse.version_1.ns > 3) {
      station_addr = parse.version_1.str + parse.version_1.ofs[3];
      if (cvt_ascii_address(dev, station_addr) == 0)
          return 0;
    }

    /* Another possibility: for the EM3288, in a special tuple */
    tuple.DesiredTuple = 0x81;
    if (CardServices(GetFirstTuple, handle, &tuple) != CS_SUCCESS)
      return -1;
    if (CardServices(GetTupleData, handle, &tuple) != CS_SUCCESS)
      return -1;
    buf[12] = '\0';
    if (cvt_ascii_address(dev, buf) == 0)
      return 0;

    return -1;
}

/*======================================================================

    Configuration stuff for the Motorola Mariner

    mot_config() writes directly to the Mariner configuration
    registers because the CIS is just bogus.

======================================================================*/

static void mot_config(dev_link_t *link)
{
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    ioaddr_t ioaddr = dev->base_addr;
    ioaddr_t iouart = link->io.BasePort2;

    /* Set UART base address and force map with COR bit 1 */
    writeb(iouart & 0xff,        smc->base + MOT_UART + CISREG_IOBASE_0);
    writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1);
    writeb(MOT_NORMAL,           smc->base + MOT_UART + CISREG_COR);

    /* Set SMC base address and force map with COR bit 1 */
    writeb(ioaddr & 0xff,        smc->base + MOT_LAN + CISREG_IOBASE_0);
    writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1);
    writeb(MOT_NORMAL,           smc->base + MOT_LAN + CISREG_COR);

    /* Wait for things to settle down */
    mdelay(100);
}

static int mot_setup(dev_link_t *link)
{
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    ioaddr_t ioaddr = dev->base_addr;
    int i, wait, loop;
    u_int addr;

    /* Read Ethernet address from Serial EEPROM */

    for (i = 0; i < 3; i++) {
      SMC_SELECT_BANK(2);
      outw(MOT_EEPROM + i, ioaddr + POINTER);
      SMC_SELECT_BANK(1);
      outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL);

      for (loop = wait = 0; loop < 200; loop++) {
          udelay(10);
          wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL));
          if (wait == 0) break;
      }
      
      if (wait)
          return -1;
      
      addr = inw(ioaddr + GENERAL);
      dev->dev_addr[2*i]   = addr & 0xff;
      dev->dev_addr[2*i+1] = (addr >> 8) & 0xff;
    }

    return 0;
}

/*====================================================================*/

static int smc_config(dev_link_t *link)
{
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    tuple_t tuple;
    cisparse_t parse;
    u_char buf[255];
    cistpl_cftable_entry_t *cf = &parse.cftable_entry;
    int i;

    tuple.Attributes = tuple.TupleOffset = 0;
    tuple.TupleData = (cisdata_t *)buf;
    tuple.TupleDataMax = sizeof(buf);
    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;

    link->io.NumPorts1 = 16;
    i = first_tuple(link->handle, &tuple, &parse);
    while (i != CS_NO_MORE_ITEMS) {
      if (i == CS_SUCCESS) {
          link->conf.ConfigIndex = cf->index;
          link->io.BasePort1 = cf->io.win[0].base;
          link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
          i = CardServices(RequestIO, link->handle, &link->io);
          if (i == CS_SUCCESS) break;
      }
      i = next_tuple(link->handle, &tuple, &parse);
    }
    if (i == CS_SUCCESS)
      dev->base_addr = link->io.BasePort1;
    return i;
}

static int smc_setup(dev_link_t *link)
{
    client_handle_t handle = link->handle;
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    tuple_t tuple;
    cisparse_t parse;
    cistpl_lan_node_id_t *node_id;
    u_char buf[255], *station_addr;
    int i;

    tuple.Attributes = tuple.TupleOffset = 0;
    tuple.TupleData = buf;
    tuple.TupleDataMax = sizeof(buf);

    /* Check for a LAN function extension tuple */
    tuple.DesiredTuple = CISTPL_FUNCE;
    i = first_tuple(handle, &tuple, &parse);
    while (i == CS_SUCCESS) {
      if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID)
          break;
      i = next_tuple(handle, &tuple, &parse);
    }
    if (i == CS_SUCCESS) {
      node_id = (cistpl_lan_node_id_t *)parse.funce.data;
      if (node_id->nb == 6) {
          for (i = 0; i < 6; i++)
            dev->dev_addr[i] = node_id->id[i];
          return 0;
      }
    }

    /* Try the third string in the Version 1 Version/ID tuple. */
    tuple.DesiredTuple = CISTPL_VERS_1;
    if (first_tuple(handle, &tuple, &parse) != CS_SUCCESS)
      return -1;
    station_addr = parse.version_1.str + parse.version_1.ofs[2];
    if (cvt_ascii_address(dev, station_addr) == 0)
      return 0;

    return -1;
}

/*====================================================================*/

static int osi_config(dev_link_t *link)
{
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    static ioaddr_t com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
    int i, j;

    link->conf.Attributes |= CONF_ENABLE_SPKR;
    link->conf.Status = CCSR_AUDIO_ENA;
    link->irq.Attributes =
      IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
    link->io.NumPorts1 = 64;
    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
    link->io.NumPorts2 = 8;
    link->io.IOAddrLines = 16;

    /* Enable Hard Decode, LAN, Modem */
    link->conf.ConfigIndex = 0x23;

    for (i = j = 0; j < 4; j++) {
      link->io.BasePort2 = com[j];
      i = CardServices(RequestIO, link->handle, &link->io);
      if (i == CS_SUCCESS) break;
    }
    if (i != CS_SUCCESS) {
      /* Fallback: turn off hard decode */
      link->conf.ConfigIndex = 0x03;
      link->io.NumPorts2 = 0;
      i = CardServices(RequestIO, link->handle, &link->io);
    }
    dev->base_addr = link->io.BasePort1 + 0x10;
    return i;
}

static int osi_setup(dev_link_t *link, u_short manfid, u_short cardid)
{
    client_handle_t handle = link->handle;
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    tuple_t tuple;
    u_char buf[255];
    int i;

    tuple.Attributes = TUPLE_RETURN_COMMON;
    tuple.TupleData = buf;
    tuple.TupleDataMax = sizeof(buf);
    tuple.TupleOffset = 0;

    /* Read the station address from tuple 0x90, subtuple 0x04 */
    tuple.DesiredTuple = 0x90;
    i = CardServices(GetFirstTuple, handle, &tuple);
    while (i == CS_SUCCESS) {
      i = CardServices(GetTupleData, handle, &tuple);
      if ((i != CS_SUCCESS) || (buf[0] == 0x04))
          break;
      i = CardServices(GetNextTuple, handle, &tuple);
    }
    if (i != CS_SUCCESS)
      return -1;
    for (i = 0; i < 6; i++)
      dev->dev_addr[i] = buf[i+2];

    if (((manfid == MANFID_OSITECH) &&
       (cardid == PRODID_OSITECH_SEVEN)) ||
      ((manfid == MANFID_PSION) &&
       (cardid == PRODID_PSION_NET100))) {
      /* Download the Seven of Diamonds firmware */
      for (i = 0; i < sizeof(__Xilinx7OD); i++) {
          outb(__Xilinx7OD[i], link->io.BasePort1+2);
          udelay(50);
      }
    } else if (manfid == MANFID_OSITECH) {
      /* Make sure both functions are powered up */
      set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
      /* Now, turn on the interrupt for both card functions */
      set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
      DEBUG(2, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
            inw(link->io.BasePort1 + OSITECH_AUI_PWR),
            inw(link->io.BasePort1 + OSITECH_RESET_ISR));
    }

    return 0;
}

/*======================================================================

    This verifies that the chip is some SMC91cXX variant, and returns
    the revision code if successful.  Otherwise, it returns -ENODEV.

======================================================================*/

static int check_sig(dev_link_t *link)
{
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    ioaddr_t ioaddr = dev->base_addr;
    int width;
    u_short s;

    SMC_SELECT_BANK(1);
    if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) {
      /* Try powering up the chip */
      outw(0, ioaddr + CONTROL);
      mdelay(55);
    }

    /* Try setting bus width */
    width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
    s = inb(ioaddr + CONFIG);
    if (width)
      s |= CFG_16BIT;
    else
      s &= ~CFG_16BIT;
    outb(s, ioaddr + CONFIG);

    /* Check Base Address Register to make sure bus width is OK */
    s = inw(ioaddr + BASE_ADDR);
    if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) &&
      ((s >> 8) != (s & 0xff))) {
      SMC_SELECT_BANK(3);
      s = inw(ioaddr + REVISION);
      return (s & 0xff);
    }

    if (width) {
      event_callback_args_t args;
      printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n");
      args.client_data = link;
      smc91c92_event(CS_EVENT_RESET_PHYSICAL, 0, &args);
      CardServices(ReleaseIO, link->handle, &link->io);
      link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
      CardServices(RequestIO, link->handle, &link->io);
      smc91c92_event(CS_EVENT_CARD_RESET, 0, &args);
      return check_sig(link);
    }
    return -ENODEV;
}

/*======================================================================

    smc91c92_config() is scheduled to run after a CARD_INSERTION event
    is received, to configure the PCMCIA socket, and to make the
    ethernet device available to the system.

======================================================================*/

#define CS_EXIT_TEST(ret, svc, label) \
if (ret != CS_SUCCESS) { cs_error(link->handle, svc, ret); goto label; }

static void smc91c92_config(dev_link_t *link)
{
    client_handle_t handle = link->handle;
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    tuple_t tuple;
    cisparse_t parse;
    u_short buf[32];
    char *name;
    int i, j, rev;
    ioaddr_t ioaddr;

    DEBUG(0, "smc91c92_config(0x%p)\n", link);

    tuple.Attributes = tuple.TupleOffset = 0;
    tuple.TupleData = (cisdata_t *)buf;
    tuple.TupleDataMax = sizeof(buf);

    tuple.DesiredTuple = CISTPL_CONFIG;
    i = first_tuple(handle, &tuple, &parse);
    CS_EXIT_TEST(i, ParseTuple, config_failed);
    link->conf.ConfigBase = parse.config.base;
    link->conf.Present = parse.config.rmask[0];

    tuple.DesiredTuple = CISTPL_MANFID;
    tuple.Attributes = TUPLE_RETURN_COMMON;
    if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) {
      smc->manfid = parse.manfid.manf;
      smc->cardid = parse.manfid.card;
    }

    /* Configure card */
    link->state |= DEV_CONFIG;

    if ((smc->manfid == MANFID_OSITECH) &&
      (smc->cardid != PRODID_OSITECH_SEVEN)) {
      i = osi_config(link);
    } else if ((smc->manfid == MANFID_MOTOROLA) ||
             ((smc->manfid == MANFID_MEGAHERTZ) &&
            ((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) ||
             (smc->cardid == PRODID_MEGAHERTZ_EM3288)))) {
      i = mhz_mfc_config(link);
    } else {
      i = smc_config(link);
    }
    CS_EXIT_TEST(i, RequestIO, config_failed);

    i = CardServices(RequestIRQ, link->handle, &link->irq);
    CS_EXIT_TEST(i, RequestIRQ, config_failed);
    i = CardServices(RequestConfiguration, link->handle, &link->conf);
    CS_EXIT_TEST(i, RequestConfiguration, config_failed);

    if (smc->manfid == MANFID_MOTOROLA)
      mot_config(link);

    dev->irq = link->irq.AssignedIRQ;

    if ((if_port >= 0) && (if_port <= 2))
      dev->if_port = if_port;
    else
      printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n");

    if (register_netdev(dev) != 0) {
      printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
      goto config_undo;
    }

    switch (smc->manfid) {
    case MANFID_OSITECH:
    case MANFID_PSION:
      i = osi_setup(link, smc->manfid, smc->cardid); break;
    case MANFID_SMC:
    case MANFID_NEW_MEDIA:
      i = smc_setup(link); break;
    case 0x128: /* For broken Megahertz cards */
    case MANFID_MEGAHERTZ:
      i = mhz_setup(link); break;
    case MANFID_MOTOROLA:
    default: /* get the hw address from EEPROM */
      i = mot_setup(link); break;
    }

    if (i != 0) {
      printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n");
      goto config_undo;
    }

    copy_dev_name(smc->node, dev);
    link->dev = &smc->node;
    smc->duplex = 0;
    smc->rx_ovrn = 0;

    rev = check_sig(link);
    name = "???";
    if (rev > 0)
      switch (rev >> 4) {
      case 3: name = "92"; break;
      case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break;
      case 5: name = "95"; break;
      case 7: name = "100"; break;
      case 8: name = "100-FD"; break;
      case 9: name = "110"; break;
      }
    printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
         "hw_addr ", dev->name, name, (rev & 0x0f), dev->base_addr,
         dev->irq);
    for (i = 0; i < 6; i++)
      printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));

    ioaddr = dev->base_addr;
    if (rev > 0) {
      u_long mir, mcr;
      SMC_SELECT_BANK(0);
      mir = inw(ioaddr + MEMINFO) & 0xff;
      if (mir == 0xff) mir++;
      /* Get scale factor for memory size */
      mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
      mir *= 128 * (1<<((mcr >> 9) & 7));
      if (mir & 0x3ff)
          printk(KERN_INFO "  %lu byte", mir);
      else
          printk(KERN_INFO "  %lu kb", mir>>10);
      SMC_SELECT_BANK(1);
      smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
      smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
      if (smc->manfid == MANFID_OSITECH)
          smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
      if ((rev >> 4) >= 7)
          smc->cfg |= CFG_MII_SELECT;
      printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
             "MII" : if_names[dev->if_port]);
    }

    if (smc->cfg & CFG_MII_SELECT) {
      SMC_SELECT_BANK(3);

      for (i = 0; i < 32; i++) {
          j = mdio_read(dev, i, 1);
          if ((j != 0) && (j != 0xffff)) break;
      }
      smc->phy_id = (i < 32) ? i : -1;
      if (i < 32) {
          DEBUG(0, "  MII transceiver at index %d, status %x.\n", i, j);
      } else {
          printk(KERN_NOTICE "  No MII transceivers found!\n");
      }

      SMC_SELECT_BANK(0);
    }

    link->state &= ~DEV_CONFIG_PENDING;
    return;

config_undo:
    unregister_netdev(dev);
config_failed:                /* CS_EXIT_TEST() calls jump to here... */
    smc91c92_release((u_long)link);
    link->state &= ~DEV_CONFIG_PENDING;

} /* smc91c92_config */

/*======================================================================

    After a card is removed, smc91c92_release() will unregister the net
    device, and release the PCMCIA configuration.  If the device is
    still open, this will be postponed until it is closed.

======================================================================*/

static void smc91c92_release(u_long arg)
{
    dev_link_t *link = (dev_link_t *)arg;
    struct smc_private *smc = link->priv;

    DEBUG(0, "smc91c92_release(0x%p)\n", link);

    if (link->open) {
      DEBUG(1, "smc91c92_cs: release postponed, '%s' still open\n",
            link->dev->dev_name);
      link->state |= DEV_STALE_CONFIG;
      return;
    }

    CardServices(ReleaseConfiguration, link->handle);
    CardServices(ReleaseIO, link->handle, &link->io);
    CardServices(ReleaseIRQ, link->handle, &link->irq);
    if (link->win) {
      iounmap(smc->base);
      CardServices(ReleaseWindow, link->win);
    }

    link->state &= ~DEV_CONFIG;

} /* smc91c92_release */

/*======================================================================

    The card status event handler.  Mostly, this schedules other
    stuff to run after an event is received.  A CARD_REMOVAL event
    also sets some flags to discourage the net drivers from trying
    to talk to the card any more.

======================================================================*/

static int smc91c92_event(event_t event, int priority,
                    event_callback_args_t *args)
{
    dev_link_t *link = args->client_data;
    struct smc_private *smc = link->priv;
    struct net_device *dev = &smc->dev;
    int i;

    DEBUG(1, "smc91c92_event(0x%06x)\n", event);

    switch (event) {
    case CS_EVENT_CARD_REMOVAL:
      link->state &= ~DEV_PRESENT;
      if (link->state & DEV_CONFIG) {
          netif_device_detach(dev);
          mod_timer(&link->release, jiffies + HZ/20);
      }
      break;
    case CS_EVENT_CARD_INSERTION:
      link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
      smc91c92_config(link);
      break;
    case CS_EVENT_PM_SUSPEND:
      link->state |= DEV_SUSPEND;
      /* Fall through... */
    case CS_EVENT_RESET_PHYSICAL:
      if (link->state & DEV_CONFIG) {
          if (link->open)
            netif_device_detach(dev);
          CardServices(ReleaseConfiguration, link->handle);
      }
      break;
    case CS_EVENT_PM_RESUME:
      link->state &= ~DEV_SUSPEND;
      /* Fall through... */
    case CS_EVENT_CARD_RESET:
      if (link->state & DEV_CONFIG) {
          if ((smc->manfid == MANFID_MEGAHERTZ) &&
            (smc->cardid == PRODID_MEGAHERTZ_EM3288))
            mhz_3288_power(link);
          CardServices(RequestConfiguration, link->handle, &link->conf);
          if (smc->manfid == MANFID_MOTOROLA)
            mot_config(link);
          if ((smc->manfid == MANFID_OSITECH) &&
            (smc->cardid != PRODID_OSITECH_SEVEN)) {
            /* Power up the card and enable interrupts */
            set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
            set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
          }
          if (((smc->manfid == MANFID_OSITECH) &&
            (smc->cardid == PRODID_OSITECH_SEVEN)) ||
            ((smc->manfid == MANFID_PSION) &&
            (smc->cardid == PRODID_PSION_NET100))) {
            /* Download the Seven of Diamonds firmware */
            for (i = 0; i < sizeof(__Xilinx7OD); i++) {
                outb(__Xilinx7OD[i], link->io.BasePort1+2);
                udelay(50);
            }
          }
          if (link->open) {
            smc_reset(dev);
            netif_device_attach(dev);
          }
      }
      break;
    }
    return 0;
} /* smc91c92_event */

/*======================================================================

    MII interface support for SMC91cXX based cards
======================================================================*/

#define MDIO_SHIFT_CLK        0x04
#define MDIO_DATA_OUT         0x01
#define MDIO_DIR_WRITE        0x08
#define MDIO_DATA_WRITE0      (MDIO_DIR_WRITE)
#define MDIO_DATA_WRITE1      (MDIO_DIR_WRITE | MDIO_DATA_OUT)
#define MDIO_DATA_READ        0x02

static void mdio_sync(ioaddr_t addr)
{
    int bits;
    for (bits = 0; bits < 32; bits++) {
      outb(MDIO_DATA_WRITE1, addr);
      outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
    }
}

static int mdio_read(struct net_device *dev, int phy_id, int loc)
{
    ioaddr_t addr = dev->base_addr + MGMT;
    u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
    int i, retval = 0;

    mdio_sync(addr);
    for (i = 13; i >= 0; i--) {
      int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
      outb(dat, addr);
      outb(dat | MDIO_SHIFT_CLK, addr);
    }
    for (i = 19; i > 0; i--) {
      outb(0, addr);
      retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
      outb(MDIO_SHIFT_CLK, addr);
    }
    return (retval>>1) & 0xffff;
}

static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
{
    ioaddr_t addr = dev->base_addr + MGMT;
    u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
    int i;

    mdio_sync(addr);
    for (i = 31; i >= 0; i--) {
      int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
      outb(dat, addr);
      outb(dat | MDIO_SHIFT_CLK, addr);
    }
    for (i = 1; i >= 0; i--) {
      outb(0, addr);
      outb(MDIO_SHIFT_CLK, addr);
    }
}

/*======================================================================

    The driver core code, most of which should be common with a
    non-PCMCIA implementation.

======================================================================*/

#ifdef PCMCIA_DEBUG
static void smc_dump(struct net_device *dev)
{
    ioaddr_t ioaddr = dev->base_addr;
    u_short i, w, save;
    save = inw(ioaddr + BANK_SELECT);
    for (w = 0; w < 4; w++) {
      SMC_SELECT_BANK(w);
      printk(KERN_DEBUG "bank %d: ", w);
      for (i = 0; i < 14; i += 2)
          printk(" %04x", inw(ioaddr + i));
      printk("\n");
    }
    outw(save, ioaddr + BANK_SELECT);
}
#endif

static int smc_open(struct net_device *dev)
{
    struct smc_private *smc = dev->priv;
    dev_link_t *link = &smc->link;

#ifdef PCMCIA_DEBUG
    DEBUG(0, "%s: smc_open(%p), ID/Window %4.4x.\n",
        dev->name, dev, inw(dev->base_addr + BANK_SELECT));
    if (pc_debug > 1) smc_dump(dev);
#endif

    /* Check that the PCMCIA card is still here. */
    if (!DEV_OK(link))
      return -ENODEV;
    /* Physical device present signature. */
    if (check_sig(link) < 0) {
      printk("smc91c92_cs: Yikes!  Bad chip signature!\n");
      return -ENODEV;
    }
    link->open++;
    MOD_INC_USE_COUNT;

    netif_start_queue(dev);
    netif_mark_up(dev);
    smc->saved_skb = 0;
    smc->packets_waiting = 0;

    smc_reset(dev);
    smc->media.function = &media_check;
    smc->media.data = (u_long)smc;
    smc->media.expires = jiffies + HZ;
    add_timer(&smc->media);

    return 0;
} /* smc_open */

/*====================================================================*/

static int smc_close(struct net_device *dev)
{
    struct smc_private *smc = dev->priv;
    dev_link_t *link = &smc->link;
    ioaddr_t ioaddr = dev->base_addr;

    DEBUG(0, "%s: smc_close(), status %4.4x.\n",
        dev->name, inw(ioaddr + BANK_SELECT));

    netif_stop_queue(dev);
    netif_mark_down(dev);

    /* Shut off all interrupts, and turn off the Tx and Rx sections.
       Don't bother to check for chip present. */
    SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */
    outw(0, ioaddr + INTERRUPT);
    SMC_SELECT_BANK(0);
    mask_bits(0xff00, ioaddr + RCR);
    mask_bits(0xff00, ioaddr + TCR);

    /* Put the chip into power-down mode. */
    SMC_SELECT_BANK(1);
    outw(CTL_POWERDOWN, ioaddr + CONTROL );

    link->open--;
    del_timer(&smc->media);
    if (link->state & DEV_STALE_CONFIG)
      mod_timer(&link->release, jiffies + HZ/20);

    MOD_DEC_USE_COUNT;

    return 0;
} /* smc_close */

static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
    struct smc_private *smc = dev->priv;
    u16 *data = (u16 *)&rq->ifr_data;
    ushort saved_bank;
    ioaddr_t ioaddr = dev->base_addr;

    if (!(smc->cfg & CFG_MII_SELECT))
      return -EOPNOTSUPP;

    saved_bank = inw(ioaddr + BANK_SELECT);
    SMC_SELECT_BANK(3);

    switch (cmd) {
    case SIOCDEVPRIVATE:
      data[0] = smc->phy_id;
    case SIOCDEVPRIVATE+1:
      data[3] = mdio_read(dev, data[0], data[1] & 0x1f);
      SMC_SELECT_BANK(saved_bank);
      return 0;
    case SIOCDEVPRIVATE+2:
      if (!capable(CAP_NET_ADMIN)) {
          SMC_SELECT_BANK(saved_bank);
          return -EPERM;
      }
      mdio_write(dev, data[0], data[1] & 0x1f, data[2]);
      SMC_SELECT_BANK(saved_bank);
      return 0;
    }
    SMC_SELECT_BANK(saved_bank);
    return -EOPNOTSUPP;
}
/*======================================================================

   Transfer a packet to the hardware and trigger the packet send.
   This may be called at either from either the Tx queue code
   or the interrupt handler.

======================================================================*/

static void smc_hardware_send_packet(struct net_device * dev)
{
    struct smc_private *smc = dev->priv;
    struct sk_buff *skb = smc->saved_skb;
    ioaddr_t ioaddr = dev->base_addr;
    u_char packet_no;

    if (!skb) {
      printk(KERN_ERR "%s: In XMIT with no packet to send.\n", dev->name);
      return;
    }

    /* There should be a packet slot waiting. */
    packet_no = inw(ioaddr + PNR_ARR) >> 8;
    if (packet_no & 0x80) {
      /* If not, there is a hardware problem!  Likely an ejected card. */
      printk(KERN_WARNING "%s: 91c92 hardware Tx buffer allocation"
             " failed, status %#2.2x.\n", dev->name, packet_no);
      dev_kfree_skb_irq(skb);
      smc->saved_skb = NULL;
      netif_start_queue(dev);
      return;
    }

    add_tx_bytes(&smc->stats, skb->len);
    /* The card should use the just-allocated buffer. */
    outw(packet_no, ioaddr + PNR_ARR);
    /* point to the beginning of the packet */
    outw(PTR_AUTOINC , ioaddr + POINTER);

    /* Send the packet length (+6 for status, length and ctl byte)
       and the status word (set to zeros). */
    {
      u_char *buf = skb->data;
      u_int length = skb->len; /* The chip will pad to ethernet min. */

      DEBUG(2, "%s: Trying to xmit packet of length %d.\n",
            dev->name, length);
      
      /* send the packet length: +6 for status word, length, and ctl */
      outw(0, ioaddr + DATA_1);
      outw(length + 6, ioaddr + DATA_1);
      outsw(ioaddr + DATA_1, buf, length >> 1);
      
      /* The odd last byte, if there is one, goes in the control word. */
      outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1);
    }

    /* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */
    outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) |
       (inw(ioaddr + INTERRUPT) & 0xff00),
       ioaddr + INTERRUPT);

    /* The chip does the rest of the work. */
    outw(MC_ENQUEUE , ioaddr + MMU_CMD);

    smc->saved_skb = NULL;
    dev_kfree_skb_irq(skb);
    dev->trans_start = jiffies;
    netif_start_queue(dev);
    return;
}

/*====================================================================*/

static void smc_tx_timeout(struct net_device *dev)
{
    struct smc_private *smc = dev->priv;
    ioaddr_t ioaddr = dev->base_addr;

    printk(KERN_NOTICE "%s: SMC91c92 transmit timed out, "
         "Tx_status %2.2x status %4.4x.\n",
         dev->name, inw(ioaddr)&0xff, inw(ioaddr + 2));
    smc->stats.tx_errors++;
    smc_reset(dev);
    dev->trans_start = jiffies;
    smc->saved_skb = NULL;
    netif_wake_queue(dev);
}

static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
    struct smc_private *smc = dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    u_short num_pages;
    short time_out, ir;

    tx_timeout_check(dev, smc_tx_timeout);
    skb_tx_check(dev, skb);

    DEBUG(2, "%s: smc_start_xmit(length = %d) called,"
        " status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2));

    if (smc->saved_skb) {
      /* THIS SHOULD NEVER HAPPEN. */
      smc->stats.tx_aborted_errors++;
      printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n",
             dev->name);
      return 1;
    }
    smc->saved_skb = skb;

    num_pages = skb->len >> 8;

    if (num_pages > 7) {
      printk(KERN_ERR "%s: Far too big packet error.\n", dev->name);
      DEV_KFREE_SKB (skb);
      smc->saved_skb = NULL;
      smc->stats.tx_dropped++;
      return 0;         /* Do not re-queue this packet. */
    }
    /* A packet is now waiting. */
    smc->packets_waiting++;

    SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */

    /* need MC_RESET to keep the memory consistent. errata? */
    if (smc->rx_ovrn) {
      outw(MC_RESET, ioaddr + MMU_CMD);
      smc->rx_ovrn = 0;
    }

    /* Allocate the memory; send the packet now if we win. */
    outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD);
    for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) {
      ir = inw(ioaddr+INTERRUPT);
      if (ir & IM_ALLOC_INT) {
          /* Acknowledge the interrupt, send the packet. */
          outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT);
          smc_hardware_send_packet(dev);  /* Send the packet now.. */
          return 0;
      }
    }

    /* Otherwise defer until the Tx-space-allocated interrupt. */
    DEBUG(2, "%s: memory allocation deferred.\n", dev->name);
    outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);

    return 0;
}

/*======================================================================

    Handle a Tx anomolous event.  Entered while in Window 2.

======================================================================*/

static void smc_tx_err(struct net_device * dev)
{
    struct smc_private *smc = (struct smc_private *)dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    int saved_packet = inw(ioaddr + PNR_ARR) & 0xff;
    int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f;
    int tx_status;

    /* select this as the packet to read from */
    outw(packet_no, ioaddr + PNR_ARR);

    /* read the first word from this packet */
    outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER);

    tx_status = inw(ioaddr + DATA_1);

    smc->stats.tx_errors++;
    if (tx_status & TS_LOSTCAR) smc->stats.tx_carrier_errors++;
    if (tx_status & TS_LATCOL)  smc->stats.tx_window_errors++;
    if (tx_status & TS_16COL) {
      smc->stats.tx_aborted_errors++;
      smc->tx_err++;
    }

    if (tx_status & TS_SUCCESS) {
      printk(KERN_NOTICE "%s: Successful packet caused error "
             "interrupt?\n", dev->name);
    }
    /* re-enable transmit */
    SMC_SELECT_BANK(0);
    outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
    SMC_SELECT_BANK(2);

    outw(MC_FREEPKT, ioaddr + MMU_CMD);   /* Free the packet memory. */

    /* one less packet waiting for me */
    smc->packets_waiting--;

    outw(saved_packet, ioaddr + PNR_ARR);
    return;
}

/*====================================================================*/

static void smc_eph_irq(struct net_device *dev)
{
    struct smc_private *smc = dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    u_short card_stats, ephs;

    SMC_SELECT_BANK(0);
    ephs = inw(ioaddr + EPH);
    DEBUG(2, "%s: Ethernet protocol handler interrupt, status"
        " %4.4x.\n", dev->name, ephs);
    /* Could be a counter roll-over warning: update stats. */
    card_stats = inw(ioaddr + COUNTER);
    /* single collisions */
    smc->stats.collisions += card_stats & 0xF;
    card_stats >>= 4;
    /* multiple collisions */
    smc->stats.collisions += card_stats & 0xF;
#if 0             /* These are for when linux supports these statistics */
    card_stats >>= 4;               /* deferred */
    card_stats >>= 4;               /* excess deferred */
#endif
    /* If we had a transmit error we must re-enable the transmitter. */
    outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);

    /* Clear a link error interrupt. */
    SMC_SELECT_BANK(1);
    outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL);
    outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
       ioaddr + CONTROL);
    SMC_SELECT_BANK(2);
}

/*====================================================================*/

static void smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
    struct smc_private *smc = dev_id;
    struct net_device *dev = &smc->dev;
    ioaddr_t ioaddr;
    u_short saved_bank, saved_pointer, mask, status;
    char bogus_cnt = INTR_WORK;           /* Work we are willing to do. */

    if (!netif_device_present(dev))
      return;
    ioaddr = dev->base_addr;

    DEBUG(3, "%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
        irq, ioaddr);

    smc->watchdog = 0;
    saved_bank = inw(ioaddr + BANK_SELECT);
    if ((saved_bank & 0xff00) != 0x3300) {
      /* The device does not exist -- the card could be off-line, or
         maybe it has been ejected. */
      DEBUG(1, "%s: SMC91c92 interrupt %d for non-existent"
            "/ejected device.\n", dev->name, irq);
      goto irq_done;
    }

    SMC_SELECT_BANK(2);
    saved_pointer = inw(ioaddr + POINTER);
    mask = inw(ioaddr + INTERRUPT) >> 8;
    /* clear all interrupts */
    outw(0, ioaddr + INTERRUPT);

    do { /* read the status flag, and mask it */
      status = inw(ioaddr + INTERRUPT) & 0xff;
      DEBUG(3, "%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
            status, mask);
      if ((status & mask) == 0)
          break;
      
      if (status & IM_RCV_INT) {
          /* Got a packet(s). */
          smc_rx(dev);
      }
      if (status & IM_TX_INT) {
          smc_tx_err(dev);
          outw(IM_TX_INT, ioaddr + INTERRUPT);
      }
      status &= mask;
      if (status & IM_TX_EMPTY_INT) {
          outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT);
          mask &= ~IM_TX_EMPTY_INT;
          smc->stats.tx_packets += smc->packets_waiting;
          smc->packets_waiting = 0;
      }
      if (status & IM_ALLOC_INT) {
          /* Clear this interrupt so it doesn't happen again */
          mask &= ~IM_ALLOC_INT;
      
          smc_hardware_send_packet(dev);
      
          /* enable xmit interrupts based on this */
          mask |= (IM_TX_EMPTY_INT | IM_TX_INT);
      
          /* and let the card send more packets to me */
          netif_wake_queue(dev);
      }
      if (status & IM_RX_OVRN_INT) {
          smc->stats.rx_errors++;
          smc->stats.rx_fifo_errors++;
          if (smc->duplex)
            smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */
          outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT);
      }
      if (status & IM_EPH_INT)
          smc_eph_irq(dev);
    } while (--bogus_cnt);

    DEBUG(3, "  Restoring saved registers mask %2.2x bank %4.4x"
        " pointer %4.4x.\n", mask, saved_bank, saved_pointer);

    /* restore state register */
    outw((mask<<8), ioaddr + INTERRUPT);
    outw(saved_pointer, ioaddr + POINTER);
    SMC_SELECT_BANK(saved_bank);

    DEBUG(3, "%s: Exiting interrupt IRQ%d.\n", dev->name, irq);

irq_done:

    if ((smc->manfid == MANFID_OSITECH) &&
      (smc->cardid != PRODID_OSITECH_SEVEN)) {
      /* Retrigger interrupt if needed */
      mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR);
      set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR);
    }
    if (smc->manfid == MANFID_MOTOROLA) {
      u_char cor;
      cor = readb(smc->base + MOT_UART + CISREG_COR);
      writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR);
      writeb(cor, smc->base + MOT_UART + CISREG_COR);
      cor = readb(smc->base + MOT_LAN + CISREG_COR);
      writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
      writeb(cor, smc->base + MOT_LAN + CISREG_COR);
    }
#ifdef DOES_NOT_WORK
    if (smc->base != NULL) { /* Megahertz MFC's */
      readb(smc->base+MEGAHERTZ_ISR);
      readb(smc->base+MEGAHERTZ_ISR);
    }
#endif
}

/*====================================================================*/

static void smc_rx(struct net_device *dev)
{
    struct smc_private *smc = (struct smc_private *)dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    int rx_status;
    int packet_length;  /* Caution: not frame length, rather words
                     to transfer from the chip. */

    /* Assertion: we are in Window 2. */

    if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) {
      printk(KERN_ERR "%s: smc_rx() with nothing on Rx FIFO.\n",
             dev->name);
      return;
    }

    /*  Reset the read pointer, and read the status and packet length. */
    outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER);
    rx_status = inw(ioaddr + DATA_1);
    packet_length = inw(ioaddr + DATA_1) & 0x07ff;

    DEBUG(2, "%s: Receive status %4.4x length %d.\n",
        dev->name, rx_status, packet_length);

    if (!(rx_status & RS_ERRORS)) {       
      /* do stuff to make a new packet */
      struct sk_buff *skb;
      
      /* Note: packet_length adds 5 or 6 extra bytes here! */
      skb = dev_alloc_skb(packet_length+2);
      
      if (skb == NULL) {
          DEBUG(1, "%s: Low memory, packet dropped.\n", dev->name);
          smc->stats.rx_dropped++;
          outw(MC_RELEASE, ioaddr + MMU_CMD);
          return;
      }
      
      packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6);
      skb_reserve(skb, 2);
      insw(ioaddr+DATA_1, skb_put(skb, packet_length),
           (packet_length+1)>>1);
      skb->protocol = eth_type_trans(skb, dev);
      
      skb->dev = dev;
      netif_rx(skb);
      dev->last_rx = jiffies;
      smc->stats.rx_packets++;
      add_rx_bytes(&smc->stats, packet_length);
      if (rx_status & RS_MULTICAST)
          smc->stats.multicast++;
    } else {
      /* error ... */
      smc->stats.rx_errors++;
      
      if (rx_status & RS_ALGNERR)  smc->stats.rx_frame_errors++;
      if (rx_status & (RS_TOOSHORT | RS_TOOLONG))
          smc->stats.rx_length_errors++;
      if (rx_status & RS_BADCRC)    smc->stats.rx_crc_errors++;
    }
    /* Let the MMU free the memory of this packet. */
    outw(MC_RELEASE, ioaddr + MMU_CMD);

    return;
}

/*====================================================================*/

static struct net_device_stats *smc_get_stats(struct net_device *dev)
{
    struct smc_private *smc = (struct smc_private *)dev->priv;
    /* Nothing to update - the 91c92 is a pretty primative chip. */
    return &smc->stats;
}

/*======================================================================

    Calculate values for the hardware multicast filter hash table.

======================================================================*/

static void fill_multicast_tbl(int count, struct dev_mc_list *addrs,
                         u_char *multicast_table)
{
    struct dev_mc_list  *mc_addr;

    for (mc_addr = addrs;  mc_addr && --count > 0;  mc_addr = mc_addr->next) {
      u_int position = ether_crc(6, mc_addr->dmi_addr);
#ifndef final_version         /* Verify multicast address. */
      if ((mc_addr->dmi_addr[0] & 1) == 0)
          continue;
#endif
      multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
    }
}

/*======================================================================

    Set the receive mode.

    This routine is used by both the protocol level to notify us of
    promiscuous/multicast mode changes, and by the open/reset code to
    initialize the Rx registers.  We always set the multicast list and
    leave the receiver running.

======================================================================*/

static void set_rx_mode(struct net_device *dev)
{
    ioaddr_t ioaddr = dev->base_addr;
    u_int multicast_table[ 2 ] = { 0, };
    unsigned long flags;
    u_short rx_cfg_setting;

    if (dev->flags & IFF_PROMISC) {
      printk(KERN_NOTICE "%s: setting Rx mode to promiscuous.\n", dev->name);
      rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti;
    } else if (dev->flags & IFF_ALLMULTI)
      rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
    else {
      if (dev->mc_count)  {
          fill_multicast_tbl(dev->mc_count, dev->mc_list,
                         (u_char *)multicast_table);
      }
      rx_cfg_setting = RxStripCRC | RxEnable;
    }

    /* Load MC table and Rx setting into the chip without interrupts. */
    save_flags(flags);
    cli();
    SMC_SELECT_BANK(3);
    outl(multicast_table[0], ioaddr + MULTICAST0);
    outl(multicast_table[1], ioaddr + MULTICAST4);
    SMC_SELECT_BANK(0);
    outw(rx_cfg_setting, ioaddr + RCR);
    SMC_SELECT_BANK(2);
    restore_flags(flags);

    return;
}

/*======================================================================

    Senses when a card's config changes. Here, it's coax or TP.

======================================================================*/

static int s9k_config(struct net_device *dev, struct ifmap *map)
{
    struct smc_private *smc = dev->priv;
    if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
      if (smc->cfg & CFG_MII_SELECT)
          return -EOPNOTSUPP;
      else if (map->port > 2)
          return -EINVAL;
      dev->if_port = map->port;
      printk(KERN_INFO "%s: switched to %s port\n",
             dev->name, if_names[dev->if_port]);
      smc_reset(dev);
    }
    return 0;
}

/*======================================================================

    Reset the chip, reloading every register that might be corrupted.

======================================================================*/

/*
  Set transceiver type, perhaps to something other than what the user
  specified in dev->if_port.
*/
static void smc_set_xcvr(struct net_device *dev, int if_port)
{
    struct smc_private *smc = (struct smc_private *)dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    u_short saved_bank;

    saved_bank = inw(ioaddr + BANK_SELECT);
    SMC_SELECT_BANK(1);
    if (if_port == 2) {
      outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG);
      if ((smc->manfid == MANFID_OSITECH) &&
          (smc->cardid != PRODID_OSITECH_SEVEN))
          set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
      smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002);
    } else {
      outw(smc->cfg, ioaddr + CONFIG);
      if ((smc->manfid == MANFID_OSITECH) &&
          (smc->cardid != PRODID_OSITECH_SEVEN))
          mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
      smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001);
    }
    SMC_SELECT_BANK(saved_bank);
}

static void smc_reset(struct net_device *dev)
{
    ioaddr_t ioaddr = dev->base_addr;
    struct smc_private *smc = dev->priv;
    int i;

    DEBUG(0, "%s: smc91c92 reset called.\n", dev->name);

    /* The first interaction must be a write to bring the chip out
       of sleep mode. */
    SMC_SELECT_BANK(0);
    /* Reset the chip. */
    outw(RCR_SOFTRESET, ioaddr + RCR);
    udelay(10);

    /* Clear the transmit and receive configuration registers. */
    outw(RCR_CLEAR, ioaddr + RCR);
    outw(TCR_CLEAR, ioaddr + TCR);

    /* Set the Window 1 control, configuration and station addr registers.
       No point in writing the I/O base register ;-> */
    SMC_SELECT_BANK(1);
    /* Automatically release succesfully transmitted packets,
       Accept link errors, counter and Tx error interrupts. */
    outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
       ioaddr + CONTROL);
    smc_set_xcvr(dev, dev->if_port);
    if ((smc->manfid == MANFID_OSITECH) &&
      (smc->cardid != PRODID_OSITECH_SEVEN))
      outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) |
           (inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00),
           ioaddr - 0x10 + OSITECH_AUI_PWR);

    /* Fill in the physical address.  The databook is wrong about the order! */
    for (i = 0; i < 6; i += 2)
      outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i],
           ioaddr + ADDR0 + i);

    /* Reset the MMU */
    SMC_SELECT_BANK(2);
    outw(MC_RESET, ioaddr + MMU_CMD);
    outw(0, ioaddr + INTERRUPT);

    /* Re-enable the chip. */
    SMC_SELECT_BANK(0);
    outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) |
       TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR);
    set_rx_mode(dev);

    if (smc->cfg & CFG_MII_SELECT) {
      SMC_SELECT_BANK(3);

      /* Reset MII */
      mdio_write(dev, smc->phy_id, 0, 0x8000);

      /* Advertise 100F, 100H, 10F, 10H */
      mdio_write(dev, smc->phy_id, 4, 0x01e1);

      /* Restart MII autonegotiation */
      mdio_write(dev, smc->phy_id, 0, 0x0000);
      mdio_write(dev, smc->phy_id, 0, 0x1200);
    }

    /* Enable interrupts. */
    SMC_SELECT_BANK(2);
    outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8,
       ioaddr + INTERRUPT);
}

/*======================================================================

    Media selection timer routine

======================================================================*/

static void media_check(u_long arg)
{
    struct smc_private *smc = (struct smc_private *)(arg);
    struct net_device *dev = &smc->dev;
    ioaddr_t ioaddr = dev->base_addr;
    u_short i, media, saved_bank;
    u_short link;

    saved_bank = inw(ioaddr + BANK_SELECT);

    if (!netif_device_present(dev))
      goto reschedule;

    SMC_SELECT_BANK(2);

    /* need MC_RESET to keep the memory consistent. errata? */
    if (smc->rx_ovrn) {
      outw(MC_RESET, ioaddr + MMU_CMD);
      smc->rx_ovrn = 0;
    }
    i = inw(ioaddr + INTERRUPT);
    SMC_SELECT_BANK(0);
    media = inw(ioaddr + EPH) & EPH_LINK_OK;
    SMC_SELECT_BANK(1);
    media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;

    /* Check for pending interrupt with watchdog flag set: with
       this, we can limp along even if the interrupt is blocked */
    if (smc->watchdog++ && ((i>>8) & i)) {
      if (!smc->fast_poll)
          printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
      smc_interrupt(dev->irq, smc, NULL);
      smc->fast_poll = HZ;
    }
    if (smc->fast_poll) {
      smc->fast_poll--;
      smc->media.expires = jiffies + 1;
      add_timer(&smc->media);
      SMC_SELECT_BANK(saved_bank);
      return;
    }

    if (smc->cfg & CFG_MII_SELECT) {
      if (smc->phy_id < 0)
          goto reschedule;

      SMC_SELECT_BANK(3);
      link = mdio_read(dev, smc->phy_id, 1);
      if (!link || (link == 0xffff)) {
          printk(KERN_INFO "%s: MII is missing!\n", dev->name);
          smc->phy_id = -1;
          goto reschedule;
      }

      link &= 0x0004;
      if (link != smc->link_status) {
          u_short p = mdio_read(dev, smc->phy_id, 5);
          printk(KERN_INFO "%s: %s link beat\n", dev->name,
            (link) ? "found" : "lost");
          smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40))
                     ? TCR_FDUPLX : 0);
          if (link) {
              printk(KERN_INFO "%s: autonegotiation complete: "
                   "%sbaseT-%cD selected\n", dev->name,
                   ((p & 0x0180) ? "100" : "10"),
                   (smc->duplex ? 'F' : 'H'));
          }
          SMC_SELECT_BANK(0);
          outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR);
          smc->link_status = link;
      }
      goto reschedule;
    }

    /* Ignore collisions unless we've had no rx's recently */
    if (jiffies - dev->last_rx > HZ) {
      if (smc->tx_err || (smc->media_status & EPH_16COL))
          media |= EPH_16COL;
    }
    smc->tx_err = 0;

    if (media != smc->media_status) {
      if ((media & smc->media_status & 1) &&
          ((smc->media_status ^ media) & EPH_LINK_OK))
          printk(KERN_INFO "%s: %s link beat\n", dev->name,
               (smc->media_status & EPH_LINK_OK ? "lost" : "found"));
      else if ((media & smc->media_status & 2) &&
             ((smc->media_status ^ media) & EPH_16COL))
          printk(KERN_INFO "%s: coax cable %s\n", dev->name,
               (media & EPH_16COL ? "problem" : "ok"));
      if (dev->if_port == 0) {
          if (media & 1) {
            if (media & EPH_LINK_OK)
                printk(KERN_INFO "%s: flipped to 10baseT\n",
                     dev->name);
            else
                smc_set_xcvr(dev, 2);
          } else {
            if (media & EPH_16COL)
                smc_set_xcvr(dev, 1);
            else
                printk(KERN_INFO "%s: flipped to 10base2\n",
                     dev->name);
          }
      }
      smc->media_status = media;
    }

reschedule:
    smc->media.expires = jiffies + HZ;
    add_timer(&smc->media);
    SMC_SELECT_BANK(saved_bank);
}


/*====================================================================*/

static int __init init_smc91c92_cs(void)
{
    servinfo_t serv;
    DEBUG(0, "%s\n", version);
    CardServices(GetCardServicesInfo, &serv);
    if (serv.Revision != CS_RELEASE_CODE) {
      printk(KERN_ERR
             "smc91c92_cs: Card Services release does not match!\n");
      return -EINVAL;
    }
    register_pccard_driver(&dev_info, &smc91c92_attach, &smc91c92_detach);
    return 0;
}

static void __exit exit_smc91c92_cs(void)
{
    DEBUG(0, "smc91c92_cs: unloading\n");
    unregister_pccard_driver(&dev_info);
    while (dev_list != NULL)
      smc91c92_detach(dev_list);
}

module_init(init_smc91c92_cs);
module_exit(exit_smc91c92_cs);

Generated by  Doxygen 1.6.0   Back to index