Logo Search packages:      
Sourcecode: pcmcia-cs version File versions  Download package

serial_cb.c

/*======================================================================

    A driver for CardBus serial devices

    serial_cb.c 1.28 2002/06/29 06:27:37

    Copyright 1998, 1999 by Donald Becker and David Hinds
    
    This software may be used and distributed according to the terms
    of the GNU General Public License, incorporated herein by
    reference.  All other rights reserved.
    
    This driver is an activator for CardBus serial cards, as
    found on multifunction (e.g. Ethernet and Modem) CardBus cards.
    
    Donald Becker may be reached as becker@scyld.com, or C/O
    Scyld Computing Corporation
    410 Severn Ave., Suite 210
    Annapolis MD 21403

    David Hinds may be reached at dahinds@users.sourceforge.net
    
======================================================================*/

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <asm/io.h>

#include <pcmcia/driver_ops.h>

/*====================================================================*/

/* Module parameters */

MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("CardBus serial card driver");
MODULE_LICENSE("GPL");

#define INT_MODULE_PARM(n, v) static int n = v; MODULE_PARM(n, "i")

#ifdef PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version =
"serial_cb.c 1.28 2002/06/29 06:27:37 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif

/*======================================================================

    Card-specific configuration hacks

======================================================================*/

static void device_setup(struct pci_dev *pdev, u_int ioaddr)
{
    u_short a, b;

    pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &a);
    pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &b);
    if (((a == 0x13a2) && (b == 0x8007)) ||
      ((a == 0x1420) && (b == 0x8003))) {
      /* Ositech, Psion 83c175-based cards */
      DEBUG(0, "  83c175 NVCTL_m = 0x%4.4x.\n", inl(ioaddr+0x80));
      outl(0x4C00, ioaddr + 0x80);
      mdelay(10);
      outl(0x4C80, ioaddr + 0x80);
    }
    DEBUG(0, "  modem registers are %2.2x %2.2x %2.2x "
        "%2.2x %2.2x %2.2x %2.2x %2.2x  %2.2x.\n",
        inb(ioaddr + 0), inb(ioaddr + 1), inb(ioaddr + 2),
        inb(ioaddr + 3), inb(ioaddr + 4), inb(ioaddr + 5),
        inb(ioaddr + 6), inb(ioaddr + 7), inb(ioaddr + 8));
}

/*======================================================================

    serial_attach() creates a serial device "instance" and registers
    it with the kernel serial driver, and serial_detach() unregisters
    an instance.

======================================================================*/

static dev_node_t *serial_attach(dev_locator_t *loc)
{
    u_int io;
    u_char bus, devfn, irq;
    int line;
    struct serial_struct serial;
    struct pci_dev *pdev;
    dev_node_t *node;

    MOD_INC_USE_COUNT;
    if (loc->bus != LOC_PCI)
      goto fail;
    bus = loc->b.pci.bus; devfn = loc->b.pci.devfn;
    pdev = pci_find_slot(bus, devfn);
    printk(KERN_INFO "serial_attach(device %02x:%02x.%d)\n",
         bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
    pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &irq);
    pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &io);
    if (!(io & PCI_BASE_ADDRESS_SPACE_IO))
      pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1, &io);
    if (!(io & PCI_BASE_ADDRESS_SPACE_IO)) {
      printk(KERN_NOTICE "serial_cb: didn't find an IO window\n");
      goto fail;
    }
    io &= PCI_BASE_ADDRESS_IO_MASK;
    device_setup(pdev, io);
    memset(&serial, 0, sizeof(serial));
    serial.port = io; serial.irq = irq;
    serial.flags = ASYNC_SKIP_TEST | ASYNC_SHARE_IRQ;

    /* Some devices seem to need extra time */
    __set_current_state(TASK_UNINTERRUPTIBLE);
    schedule_timeout(HZ/50);

    line = register_serial(&serial);
    if (line < 0) {
      printk(KERN_NOTICE "serial_cb: register_serial() at 0x%04lx,"
             " irq %d failed\n", (u_long)serial.port, serial.irq);
      goto fail;
    }
    node = kmalloc(sizeof(dev_node_t), GFP_KERNEL);
    if (!node) goto fail_alloc;
    sprintf(node->dev_name, "ttyS%d", line);
    node->major = TTY_MAJOR; node->minor = 0x40 + line;
    node->next = NULL;
    return node;

fail_alloc:
    unregister_serial(line);
fail:
    MOD_DEC_USE_COUNT;
    return NULL;
}

static void serial_detach(dev_node_t *node)
{
    DEBUG(0, "serial_detach(ttyS%02d)\n", node->minor - 0x40);
    unregister_serial(node->minor - 0x40);
    kfree(node);
    MOD_DEC_USE_COUNT;
}

/*====================================================================*/

struct driver_operations serial_ops = {
    "serial_cb", serial_attach, NULL, NULL, serial_detach
};

static int __init init_serial_cb(void)
{
    DEBUG(0, "%s\n", version);
    register_driver(&serial_ops);
    return 0;
}

static void __exit exit_serial_cb(void)
{
    DEBUG(0, "serial_cb: unloading\n");
    unregister_driver(&serial_ops);
}

module_init(init_serial_cb);
module_exit(exit_serial_cb);

Generated by  Doxygen 1.6.0   Back to index