Logo Search packages:      
Sourcecode: pcmcia-cs version File versions

3c589_cs.c

/*======================================================================

    A PCMCIA ethernet driver for the 3com 3c589 card.
    
    Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net

    3c589_cs.c 1.167 2003/08/25 15:57:40

    The network driver code is based on Donald Becker's 3c589 code:
    
    Written 1994 by Donald Becker.
    Copyright 1993 United States Government as represented by the
    Director, National Security Agency.  This software may be used and
    distributed according to the terms of the GNU General Public License,
    incorporated herein by reference.
    Donald Becker may be reached at becker@scyld.com

======================================================================*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/bitops.h>

#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>

#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>

/* To minimize the size of the driver source I only define operating
   constants if they are used several times.  You'll need the manual
   if you want to understand driver details. */
/* Offsets from base I/O address. */
#define EL3_DATA  0x00
#define EL3_TIMER 0x0a
#define EL3_CMD         0x0e
#define EL3_STATUS      0x0e

#define EEPROM_READ     0x0080
#define EEPROM_BUSY     0x8000

#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)

/* The top five bits written to EL3_CMD are a command, the lower
   11 bits are the parameter, if applicable. */
enum c509cmd {
    TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
    RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
    TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
    FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
    SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
    SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
    StatsDisable = 22<<11, StopCoax = 23<<11,
};

enum c509status {
    IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
    TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
    IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000
};

/* The SetRxFilter command accepts the following classes: */
enum RxFilter {
    RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
};

/* Register window 1 offsets, the window used in normal operation. */
#define TX_FIFO         0x00
#define RX_FIFO         0x00
#define RX_STATUS       0x08
#define TX_STATUS       0x0B
#define TX_FREE         0x0C  /* Remaining free bytes in Tx buffer. */

#define WN0_IRQ         0x08  /* Window 0: Set IRQ line in bits 12-15. */
#define WN4_MEDIA 0x0A  /* Window 4: Various transcvr/media bits. */
#define MEDIA_TP  0x00C0      /* Enable link beat and jabber for 10baseT. */
#define MEDIA_LED 0x0001      /* Enable link light on 3C589E cards. */

/* Time in jiffies before concluding Tx hung */
#define TX_TIMEOUT      ((400*HZ)/1000)

struct el3_private {
    dev_link_t          link;
    struct net_device   dev;
    dev_node_t          node;
    struct net_device_stats stats;
    /* For transceiver monitoring */
    struct timer_list   media;
    u_short       media_status;
    u_short       fast_poll;
    u_long        last_irq;
};

static char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };

/*====================================================================*/

/* Module parameters */

MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver");
MODULE_LICENSE("GPL");

#define INT_MODULE_PARM(n, v) static int n = v; MODULE_PARM(n, "i")

/* Special hook for setting if_port when module is loaded */
INT_MODULE_PARM(if_port, 0);

/* Bit map of interrupts to choose from */
INT_MODULE_PARM(irq_mask, 0xdeb8);
static int irq_list[4] = { -1 };
MODULE_PARM(irq_list, "1-4i");

#ifdef PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version =
"3c589_cs.c 1.167 2003/08/25 15:57:40 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif

/*====================================================================*/

static void tc589_config(dev_link_t *link);
static void tc589_release(u_long arg);
static int tc589_event(event_t event, int priority,
                   event_callback_args_t *args);

static u_short read_eeprom(ioaddr_t ioaddr, int index);
static void tc589_reset(struct net_device *dev);
static void media_check(u_long arg);
static int el3_config(struct net_device *dev, struct ifmap *map);
static int el3_open(struct net_device *dev);
static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void el3_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static void update_stats(struct net_device *dev);
static struct net_device_stats *el3_get_stats(struct net_device *dev);
static int el3_rx(struct net_device *dev);
static int el3_close(struct net_device *dev);
static void el3_tx_timeout(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);

static dev_info_t dev_info = "3c589_cs";

static dev_link_t *tc589_attach(void);
static void tc589_detach(dev_link_t *);

static dev_link_t *dev_list = NULL;

/*======================================================================

    This bit of code is used to avoid unregistering network devices
    at inappropriate times.  2.2 and later kernels are fairly picky
    about when this can happen.
    
======================================================================*/

static void flush_stale_links(void)
{
    dev_link_t *link, *next;
    for (link = dev_list; link; link = next) {
      next = link->next;
      if (link->state & DEV_STALE_LINK)
          tc589_detach(link);
    }
}

/*====================================================================*/

static void cs_error(client_handle_t handle, int func, int ret)
{
    error_info_t err = { func, ret };
    CardServices(ReportError, handle, &err);
}

/*======================================================================

    tc589_attach() creates an "instance" of the driver, allocating
    local data structures for one device.  The device is registered
    with Card Services.

======================================================================*/

static dev_link_t *tc589_attach(void)
{
    struct el3_private *lp;
    client_reg_t client_reg;
    dev_link_t *link;
    struct net_device *dev;
    int i, ret;

    DEBUG(0, "3c589_attach()\n");
    flush_stale_links();
    
    /* Create new ethernet device */
    lp = kmalloc(sizeof(*lp), GFP_KERNEL);
    if (!lp) return NULL;
    memset(lp, 0, sizeof(*lp));
    link = &lp->link; dev = &lp->dev;
    link->priv = dev->priv = link->irq.Instance = lp;

    init_timer(&link->release);
    link->release.function = &tc589_release;
    link->release.data = (u_long)link;
    link->io.NumPorts1 = 16;
    link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
    if (irq_list[0] == -1)
      link->irq.IRQInfo2 = irq_mask;
    else
      for (i = 0; i < 4; i++)
          link->irq.IRQInfo2 |= 1 << irq_list[i];
    link->irq.Handler = &el3_interrupt;
    link->conf.Attributes = CONF_ENABLE_IRQ;
    link->conf.Vcc = 50;
    link->conf.IntType = INT_MEMORY_AND_IO;
    link->conf.ConfigIndex = 1;
    link->conf.Present = PRESENT_OPTION;
    
    /* The EL3-specific entries in the device structure. */
    dev->hard_start_xmit = &el3_start_xmit;
    dev->set_config = &el3_config;
    dev->get_stats = &el3_get_stats;
    dev->set_multicast_list = &set_multicast_list;
    ether_setup(dev);
    init_dev_name(dev, lp->node);
    dev->open = &el3_open;
    dev->stop = &el3_close;
#ifdef HAVE_TX_TIMEOUT
    dev->tx_timeout = el3_tx_timeout;
    dev->watchdog_timeo = TX_TIMEOUT;
#endif
    
    /* Register with Card Services */
    link->next = dev_list;
    dev_list = link;
    client_reg.dev_info = &dev_info;
    client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
    client_reg.EventMask =
      CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
      CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
      CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
    client_reg.event_handler = &tc589_event;
    client_reg.Version = 0x0210;
    client_reg.event_callback_args.client_data = link;
    ret = CardServices(RegisterClient, &link->handle, &client_reg);
    if (ret != 0) {
      cs_error(link->handle, RegisterClient, ret);
      tc589_detach(link);
      return NULL;
    }
    
    return link;
} /* tc589_attach */

/*======================================================================

    This deletes a driver "instance".  The device is de-registered
    with Card Services.  If it has been released, all local data
    structures are freed.  Otherwise, the structures will be freed
    when the device is released.

======================================================================*/

static void tc589_detach(dev_link_t *link)
{
    struct el3_private *lp = link->priv;
    dev_link_t **linkp;
    
    DEBUG(0, "3c589_detach(0x%p)\n", link);
    
    /* Locate device structure */
    for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
      if (*linkp == link) break;
    if (*linkp == NULL)
      return;

    del_timer(&link->release);
    if (link->state & DEV_CONFIG) {
      tc589_release((u_long)link);
      if (link->state & DEV_STALE_CONFIG) {
          link->state |= DEV_STALE_LINK;
          return;
      }
    }
    
    if (link->handle)
      CardServices(DeregisterClient, link->handle);
    
    /* Unlink device structure, free bits */
    *linkp = link->next;
    if (link->dev)
      unregister_netdev(&lp->dev);
    kfree(lp);
    
} /* tc589_detach */

/*======================================================================

    tc589_config() is scheduled to run after a CARD_INSERTION event
    is received, to configure the PCMCIA socket, and to make the
    ethernet device available to the system.
    
======================================================================*/

#define CS_CHECK(fn, args...) \
while ((last_ret=CardServices(last_fn=(fn), args))!=0) goto cs_failed

static void tc589_config(dev_link_t *link)
{
    client_handle_t handle = link->handle;
    struct el3_private *lp = link->priv;
    struct net_device *dev = &lp->dev;
    tuple_t tuple;
    cisparse_t parse;
    u_short buf[32], *phys_addr;
    int last_fn, last_ret, i, j, multi = 0;
    ioaddr_t ioaddr;
    char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
    
    DEBUG(0, "3c589_config(0x%p)\n", link);

    phys_addr = (u_short *)dev->dev_addr;
    tuple.Attributes = 0;
    tuple.DesiredTuple = CISTPL_CONFIG;
    CS_CHECK(GetFirstTuple, handle, &tuple);
    tuple.TupleData = (cisdata_t *)buf;
    tuple.TupleDataMax = sizeof(buf);
    tuple.TupleOffset = 0;
    CS_CHECK(GetTupleData, handle, &tuple);
    CS_CHECK(ParseTuple, handle, &tuple, &parse);
    link->conf.ConfigBase = parse.config.base;
    link->conf.Present = parse.config.rmask[0];
    
    /* Is this a 3c562? */
    tuple.DesiredTuple = CISTPL_MANFID;
    tuple.Attributes = TUPLE_RETURN_COMMON;
    if ((CardServices(GetFirstTuple, handle, &tuple) == CS_SUCCESS) &&
      (CardServices(GetTupleData, handle, &tuple) == CS_SUCCESS)) {
      if (le16_to_cpu(buf[0]) != MANFID_3COM)
          printk(KERN_INFO "3c589_cs: hmmm, is this really a "
               "3Com card??\n");
      multi = (le16_to_cpu(buf[1]) == PRODID_3COM_3C562);
    }
    
    /* Configure card */
    link->state |= DEV_CONFIG;

    /* For the 3c562, the base address must be xx00-xx7f */
    link->io.IOAddrLines = 16;
    for (i = j = 0; j < 0x400; j += 0x10) {
      if (multi && (j & 0x80)) continue;
      link->io.BasePort1 = j ^ 0x300;
      i = CardServices(RequestIO, link->handle, &link->io);
      if (i == CS_SUCCESS) break;
    }
    if (i != CS_SUCCESS) {
      cs_error(link->handle, RequestIO, i);
      goto failed;
    }
    CS_CHECK(RequestIRQ, link->handle, &link->irq);
    CS_CHECK(RequestConfiguration, link->handle, &link->conf);
      
    dev->irq = link->irq.AssignedIRQ;
    dev->base_addr = link->io.BasePort1;
    if (register_netdev(dev) != 0) {
      printk(KERN_NOTICE "3c589_cs: register_netdev() failed\n");
      goto failed;
    }
    
    ioaddr = dev->base_addr;
    EL3WINDOW(0);

    /* The 3c589 has an extra EEPROM for configuration info, including
       the hardware address.  The 3c562 puts the address in the CIS. */
    tuple.DesiredTuple = 0x88;
    if (CardServices(GetFirstTuple, handle, &tuple) == CS_SUCCESS) {
      CardServices(GetTupleData, handle, &tuple);
      for (i = 0; i < 3; i++)
          phys_addr[i] = htons(buf[i]);
    } else {
      for (i = 0; i < 3; i++)
          phys_addr[i] = htons(read_eeprom(ioaddr, i));
      if (phys_addr[0] == 0x6060) {
          printk(KERN_NOTICE "3c589_cs: IO port conflict at 0x%03lx"
               "-0x%03lx\n", dev->base_addr, dev->base_addr+15);
          goto failed;
      }
    }

    copy_dev_name(lp->node, dev);
    link->dev = &lp->node;
    
    /* The address and resource configuration register aren't loaded from
       the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version. */
    outw(0x3f00, ioaddr + 8);

    /* The if_port symbol can be set when the module is loaded */
    if ((if_port >= 0) && (if_port <= 3))
      dev->if_port = if_port;
    else
      printk(KERN_NOTICE "3c589_cs: invalid if_port requested\n");
    
    printk(KERN_INFO "%s: 3Com 3c%s, io %#3lx, irq %d, hw_addr ",
         dev->name, (multi ? "562" : "589"), dev->base_addr,
         dev->irq);
    for (i = 0; i < 6; i++)
      printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
    i = inl(ioaddr);
    printk(KERN_INFO "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
         (i & 7) ? 32 : 8, ram_split[(i >> 16) & 3],
         if_names[dev->if_port]);
    link->state &= ~DEV_CONFIG_PENDING;
    return;

cs_failed:
    cs_error(link->handle, last_fn, last_ret);
failed:
    tc589_release((u_long)link);
    link->state &= ~DEV_CONFIG_PENDING;
    return;
    
} /* tc589_config */

/*======================================================================

    After a card is removed, tc589_release() will unregister the net
    device, and release the PCMCIA configuration.  If the device is
    still open, this will be postponed until it is closed.
    
======================================================================*/

static void tc589_release(u_long arg)
{
    dev_link_t *link = (dev_link_t *)arg;

    DEBUG(0, "3c589_release(0x%p)\n", link);
    
    if (link->open) {
      DEBUG(1, "3c589_cs: release postponed, '%s' still open\n",
            link->dev->dev_name);
      link->state |= DEV_STALE_CONFIG;
      return;
    }
    
    CardServices(ReleaseConfiguration, link->handle);
    CardServices(ReleaseIO, link->handle, &link->io);
    CardServices(ReleaseIRQ, link->handle, &link->irq);
    
    link->state &= ~DEV_CONFIG;
    
} /* tc589_release */

/*======================================================================

    The card status event handler.  Mostly, this schedules other
    stuff to run after an event is received.  A CARD_REMOVAL event
    also sets some flags to discourage the net drivers from trying
    to talk to the card any more.
    
======================================================================*/

static int tc589_event(event_t event, int priority,
                   event_callback_args_t *args)
{
    dev_link_t *link = args->client_data;
    struct el3_private *lp = link->priv;
    struct net_device *dev = &lp->dev;
    
    DEBUG(1, "3c589_event(0x%06x)\n", event);
    
    switch (event) {
    case CS_EVENT_CARD_REMOVAL:
      link->state &= ~DEV_PRESENT;
      if (link->state & DEV_CONFIG) {
          netif_device_detach(dev);
          mod_timer(&link->release, jiffies + HZ/20);
      }
      break;
    case CS_EVENT_CARD_INSERTION:
      link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
      tc589_config(link);
      break;
    case CS_EVENT_PM_SUSPEND:
      link->state |= DEV_SUSPEND;
      /* Fall through... */
    case CS_EVENT_RESET_PHYSICAL:
      if (link->state & DEV_CONFIG) {
          if (link->open)
            netif_device_detach(dev);
          CardServices(ReleaseConfiguration, link->handle);
      }
      break;
    case CS_EVENT_PM_RESUME:
      link->state &= ~DEV_SUSPEND;
      /* Fall through... */
    case CS_EVENT_CARD_RESET:
      if (link->state & DEV_CONFIG) {
          CardServices(RequestConfiguration, link->handle, &link->conf);
          if (link->open) {
            tc589_reset(dev);
            netif_device_attach(dev);
          }
      }
      break;
    }
    return 0;
} /* tc589_event */

/*====================================================================*/

/*
  Use this for commands that may take time to finish
*/
static void tc589_wait_for_completion(struct net_device *dev, int cmd)
{
    int i = 100;
    outw(cmd, dev->base_addr + EL3_CMD);
    while (--i > 0)
      if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
    if (i == 0)
      printk(KERN_NOTICE "%s: command 0x%04x did not complete!\n",
             dev->name, cmd);
}

/*
  Read a word from the EEPROM using the regular EEPROM access register.
  Assume that we are in register window zero.
*/
static u_short read_eeprom(ioaddr_t ioaddr, int index)
{
    int i;
    outw(EEPROM_READ + index, ioaddr + 10);
    /* Reading the eeprom takes 162 us */
    for (i = 1620; i >= 0; i--)
      if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
          break;
    return inw(ioaddr + 12);
}

/*
  Set transceiver type, perhaps to something other than what the user
  specified in dev->if_port.
*/
static void tc589_set_xcvr(struct net_device *dev, int if_port)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    
    EL3WINDOW(0);
    switch (if_port) {
    case 0: case 1: outw(0, ioaddr + 6); break;
    case 2: outw(3<<14, ioaddr + 6); break;
    case 3: outw(1<<14, ioaddr + 6); break;
    }
    /* On PCMCIA, this just turns on the LED */
    outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
    /* 10baseT interface, enable link beat and jabber check. */
    EL3WINDOW(4);
    outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
    EL3WINDOW(1);
    if (if_port == 2)
      lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
    else
      lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
}

static void dump_status(struct net_device *dev)
{
    ioaddr_t ioaddr = dev->base_addr;
    EL3WINDOW(1);
    printk(KERN_INFO "  irq status %04x, rx status %04x, tx status "
         "%02x  tx free %04x\n", inw(ioaddr+EL3_STATUS),
         inw(ioaddr+RX_STATUS), inb(ioaddr+TX_STATUS),
         inw(ioaddr+TX_FREE));
    EL3WINDOW(4);
    printk(KERN_INFO "  diagnostics: fifo %04x net %04x ethernet %04x"
         " media %04x\n", inw(ioaddr+0x04), inw(ioaddr+0x06),
         inw(ioaddr+0x08), inw(ioaddr+0x0a));
    EL3WINDOW(1);
}

/* Reset and restore all of the 3c589 registers. */
static void tc589_reset(struct net_device *dev)
{
    ioaddr_t ioaddr = dev->base_addr;
    int i;
    
    EL3WINDOW(0);
    outw(0x0001, ioaddr + 4);             /* Activate board. */ 
    outw(0x3f00, ioaddr + 8);             /* Set the IRQ line. */
    
    /* Set the station address in window 2. */
    EL3WINDOW(2);
    for (i = 0; i < 6; i++)
      outb(dev->dev_addr[i], ioaddr + i);

    tc589_set_xcvr(dev, dev->if_port);
    
    /* Switch to the stats window, and clear all stats by reading. */
    outw(StatsDisable, ioaddr + EL3_CMD);
    EL3WINDOW(6);
    for (i = 0; i < 9; i++)
      inb(ioaddr+i);
    inw(ioaddr + 10);
    inw(ioaddr + 12);
    
    /* Switch to register set 1 for normal use. */
    EL3WINDOW(1);

    /* Accept b-cast and phys addr only. */
    outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
    outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
    outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
    outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
    /* Allow status bits to be seen. */
    outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
    /* Ack all pending events, and set active indicator mask. */
    outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
       ioaddr + EL3_CMD);
    outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
       | AdapterFailure, ioaddr + EL3_CMD);
}

static int el3_config(struct net_device *dev, struct ifmap *map)
{
    if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
      if (map->port <= 3) {
          dev->if_port = map->port;
          printk(KERN_INFO "%s: switched to %s port\n",
               dev->name, if_names[dev->if_port]);
          tc589_set_xcvr(dev, dev->if_port);
      } else
          return -EINVAL;
    }
    return 0;
}

static int el3_open(struct net_device *dev)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    dev_link_t *link = &lp->link;
    
    if (!DEV_OK(link))
      return -ENODEV;

    link->open++;
    MOD_INC_USE_COUNT;
    netif_start_queue(dev);
    netif_mark_up(dev);
    
    tc589_reset(dev);
    lp->media.function = &media_check;
    lp->media.data = (u_long)lp;
    lp->media.expires = jiffies + HZ;
    add_timer(&lp->media);

    DEBUG(1, "%s: opened, status %4.4x.\n",
        dev->name, inw(dev->base_addr + EL3_STATUS));
    
    return 0;
}

static void el3_tx_timeout(struct net_device *dev)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    
    printk(KERN_NOTICE "%s: Transmit timed out!\n", dev->name);
    dump_status(dev);
    lp->stats.tx_errors++;
    dev->trans_start = jiffies;
    /* Issue TX_RESET and TX_START commands. */
    tc589_wait_for_completion(dev, TxReset);
    outw(TxEnable, ioaddr + EL3_CMD);
    netif_wake_queue(dev);
}

static void pop_tx_status(struct net_device *dev)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    int i;
    
    /* Clear the Tx status stack. */
    for (i = 32; i > 0; i--) {
      u_char tx_status = inb(ioaddr + TX_STATUS);
      if (!(tx_status & 0x84)) break;
      /* reset transmitter on jabber error or underrun */
      if (tx_status & 0x30)
          tc589_wait_for_completion(dev, TxReset);
      if (tx_status & 0x38) {
          DEBUG(1, "%s: transmit error: status 0x%02x\n",
              dev->name, tx_status);
          outw(TxEnable, ioaddr + EL3_CMD);
          lp->stats.tx_aborted_errors++;
      }
      outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
    }
}

static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
    ioaddr_t ioaddr = dev->base_addr;

    tx_timeout_check(dev, el3_tx_timeout);
    skb_tx_check(dev, skb);

    DEBUG(3, "%s: el3_start_xmit(length = %ld) called, "
        "status %4.4x.\n", dev->name, (long)skb->len,
        inw(ioaddr + EL3_STATUS));

    add_tx_bytes(&((struct el3_private *)dev->priv)->stats, skb->len);

    /* Put out the doubleword header... */
    outw(skb->len, ioaddr + TX_FIFO);
    outw(0x00, ioaddr + TX_FIFO);
    /* ... and the packet rounded to a doubleword. */
    outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);

    dev->trans_start = jiffies;
    if (inw(ioaddr + TX_FREE) > 1536) {
      netif_start_queue(dev);
    } else
      /* Interrupt us when the FIFO has room for max-sized packet. */
      outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);

    DEV_KFREE_SKB(skb);
    pop_tx_status(dev);
    
    return 0;
}

/* The EL3 interrupt handler. */
static void el3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
    struct el3_private *lp = dev_id;
    struct net_device *dev = &lp->dev;
    ioaddr_t ioaddr, status;
    int i = 0;
    
    if (!netif_device_present(dev))
      return;
    ioaddr = dev->base_addr;

    DEBUG(3, "%s: interrupt, status %4.4x.\n",
        dev->name, inw(ioaddr + EL3_STATUS));
    
    while ((status = inw(ioaddr + EL3_STATUS)) &
      (IntLatch | RxComplete | StatsFull)) {
      if (!netif_device_present(dev) ||
          ((status & 0xe000) != 0x2000)) {
          DEBUG(1, "%s: interrupt from dead card\n", dev->name);
          break;
      }
      
      if (status & RxComplete)
          el3_rx(dev);
      
      if (status & TxAvailable) {
          DEBUG(3, "    TX room bit was handled.\n");
          /* There's room in the FIFO for a full-sized packet. */
          outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
          netif_wake_queue(dev);
      }
      
      if (status & TxComplete)
          pop_tx_status(dev);

      if (status & (AdapterFailure | RxEarly | StatsFull)) {
          /* Handle all uncommon interrupts. */
          if (status & StatsFull)         /* Empty statistics. */
            update_stats(dev);
          if (status & RxEarly) {         /* Rx early is unused. */
            el3_rx(dev);
            outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
          }
          if (status & AdapterFailure) {
            u16 fifo_diag;
            EL3WINDOW(4);
            fifo_diag = inw(ioaddr + 4);
            EL3WINDOW(1);
            printk(KERN_NOTICE "%s: adapter failure, FIFO diagnostic"
                   " register %04x.\n", dev->name, fifo_diag);
            if (fifo_diag & 0x0400) {
                /* Tx overrun */
                tc589_wait_for_completion(dev, TxReset);
                outw(TxEnable, ioaddr + EL3_CMD);
            }
            if (fifo_diag & 0x2000) {
                /* Rx underrun */
                tc589_wait_for_completion(dev, RxReset);
                set_multicast_list(dev);
                outw(RxEnable, ioaddr + EL3_CMD);
            }
            outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
          }
      }
      
      if (++i > 10) {
          printk(KERN_NOTICE "%s: infinite loop in interrupt, "
               "status %4.4x.\n", dev->name, status);
          /* Clear all interrupts */
          outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
          break;
      }
      /* Acknowledge the IRQ. */
      outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
    }

    lp->last_irq = jiffies;
    DEBUG(3, "%s: exiting interrupt, status %4.4x.\n",
        dev->name, inw(ioaddr + EL3_STATUS));
    return;
}

static void media_check(u_long arg)
{
    struct el3_private *lp = (struct el3_private *)(arg);
    struct net_device *dev = &lp->dev;
    ioaddr_t ioaddr = dev->base_addr;
    u_short media, errs;
    u_long flags;

    if (!netif_device_present(dev)) goto reschedule;

    EL3WINDOW(1);
    /* Check for pending interrupt with expired latency timer: with
       this, we can limp along even if the interrupt is blocked */
    if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
      (inb(ioaddr + EL3_TIMER) == 0xff)) {
      if (!lp->fast_poll)
          printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
      el3_interrupt(dev->irq, lp, NULL);
      lp->fast_poll = HZ;
    }
    if (lp->fast_poll) {
      lp->fast_poll--;
      lp->media.expires = jiffies + 1;
      add_timer(&lp->media);
      return;
    }
    
    save_flags(flags);
    cli();
    EL3WINDOW(4);
    media = inw(ioaddr+WN4_MEDIA) & 0xc810;

    /* Ignore collisions unless we've had no irq's recently */
    if (jiffies - lp->last_irq < HZ) {
      media &= ~0x0010;
    } else {
      /* Try harder to detect carrier errors */
      EL3WINDOW(6);
      outw(StatsDisable, ioaddr + EL3_CMD);
      errs = inb(ioaddr + 0);
      outw(StatsEnable, ioaddr + EL3_CMD);
      lp->stats.tx_carrier_errors += errs;
      if (errs || (lp->media_status & 0x0010)) media |= 0x0010;
    }

    if (media != lp->media_status) {
      if ((media & lp->media_status & 0x8000) &&
          ((lp->media_status ^ media) & 0x0800))
          printk(KERN_INFO "%s: %s link beat\n", dev->name,
               (lp->media_status & 0x0800 ? "lost" : "found"));
      else if ((media & lp->media_status & 0x4000) &&
             ((lp->media_status ^ media) & 0x0010))
          printk(KERN_INFO "%s: coax cable %s\n", dev->name,
               (lp->media_status & 0x0010 ? "ok" : "problem"));
      if (dev->if_port == 0) {
          if (media & 0x8000) {
            if (media & 0x0800)
                printk(KERN_INFO "%s: flipped to 10baseT\n",
                     dev->name);
            else
                tc589_set_xcvr(dev, 2);
          } else if (media & 0x4000) {
            if (media & 0x0010)
                tc589_set_xcvr(dev, 1);
            else
                printk(KERN_INFO "%s: flipped to 10base2\n",
                     dev->name);
          }
      }
      lp->media_status = media;
    }
    
    EL3WINDOW(1);
    restore_flags(flags);

reschedule:
    lp->media.expires = jiffies + HZ;
    add_timer(&lp->media);
}

static struct net_device_stats *el3_get_stats(struct net_device *dev)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    unsigned long flags;
    dev_link_t *link = &lp->link;

    if (DEV_OK(link)) {
      save_flags(flags);
      cli();
      update_stats(dev);
      restore_flags(flags);
    }
    return &lp->stats;
}

/*
  Update statistics.  We change to register window 6, so this should be run
  single-threaded if the device is active. This is expected to be a rare
  operation, and it's simpler for the rest of the driver to assume that
  window 1 is always valid rather than use a special window-state variable.
*/
static void update_stats(struct net_device *dev)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    ioaddr_t ioaddr = dev->base_addr;

    DEBUG(2, "%s: updating the statistics.\n", dev->name);
    /* Turn off statistics updates while reading. */
    outw(StatsDisable, ioaddr + EL3_CMD);
    /* Switch to the stats window, and read everything. */
    EL3WINDOW(6);
    lp->stats.tx_carrier_errors     += inb(ioaddr + 0);
    lp->stats.tx_heartbeat_errors   += inb(ioaddr + 1);
    /* Multiple collisions. */            inb(ioaddr + 2);
    lp->stats.collisions            += inb(ioaddr + 3);
    lp->stats.tx_window_errors            += inb(ioaddr + 4);
    lp->stats.rx_fifo_errors        += inb(ioaddr + 5);
    lp->stats.tx_packets            += inb(ioaddr + 6);
    /* Rx packets   */              inb(ioaddr + 7);
    /* Tx deferrals */              inb(ioaddr + 8);
    /* Rx octets */                 inw(ioaddr + 10);
    /* Tx octets */                 inw(ioaddr + 12);
    
    /* Back to window 1, and turn statistics back on. */
    EL3WINDOW(1);
    outw(StatsEnable, ioaddr + EL3_CMD);
}

static int el3_rx(struct net_device *dev)
{
    struct el3_private *lp = (struct el3_private *)dev->priv;
    ioaddr_t ioaddr = dev->base_addr;
    int worklimit = 32;
    short rx_status;
    
    DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
        dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
    while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
         (--worklimit >= 0)) {
      if (rx_status & 0x4000) { /* Error, update stats. */
          short error = rx_status & 0x3800;
          lp->stats.rx_errors++;
          switch (error) {
          case 0x0000:  lp->stats.rx_over_errors++; break;
          case 0x0800:  lp->stats.rx_length_errors++; break;
          case 0x1000:  lp->stats.rx_frame_errors++; break;
          case 0x1800:  lp->stats.rx_length_errors++; break;
          case 0x2000:  lp->stats.rx_frame_errors++; break;
          case 0x2800:  lp->stats.rx_crc_errors++; break;
          }
      } else {
          short pkt_len = rx_status & 0x7ff;
          struct sk_buff *skb;
          
          skb = dev_alloc_skb(pkt_len+5);
          
          DEBUG(3, "    Receiving packet size %d status %4.4x.\n",
              pkt_len, rx_status);
          if (skb != NULL) {
            skb->dev = dev;
            skb_reserve(skb, 2);
            insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
                 (pkt_len+3)>>2);
            skb->protocol = eth_type_trans(skb, dev);
            netif_rx(skb);
            dev->last_rx = jiffies;
            lp->stats.rx_packets++;
            add_rx_bytes(&lp->stats, pkt_len);
          } else {
            DEBUG(1, "%s: couldn't allocate a sk_buff of"
                  " size %d.\n", dev->name, pkt_len);
            lp->stats.rx_dropped++;
          }
      }
      /* Pop the top of the Rx FIFO */
      tc589_wait_for_completion(dev, RxDiscard);
    }
    if (worklimit == 0)
      printk(KERN_NOTICE "%s: too much work in el3_rx!\n", dev->name);
    return 0;
}

static void set_multicast_list(struct net_device *dev)
{
    struct el3_private *lp = dev->priv;
    dev_link_t *link = &lp->link;
    ioaddr_t ioaddr = dev->base_addr;
    u_short opts = SetRxFilter | RxStation | RxBroadcast;

    if (!(DEV_OK(link))) return;
    if (dev->flags & IFF_PROMISC)
      opts |= RxMulticast | RxProm;
    else if (dev->mc_count || (dev->flags & IFF_ALLMULTI))
      opts |= RxMulticast;
    outw(opts, ioaddr + EL3_CMD);
}

static int el3_close(struct net_device *dev)
{
    struct el3_private *lp = dev->priv;
    dev_link_t *link = &lp->link;
    ioaddr_t ioaddr = dev->base_addr;
    
    DEBUG(1, "%s: shutting down ethercard.\n", dev->name);

    if (DEV_OK(link)) {
      /* Turn off statistics ASAP.  We update lp->stats below. */
      outw(StatsDisable, ioaddr + EL3_CMD);
      
      /* Disable the receiver and transmitter. */
      outw(RxDisable, ioaddr + EL3_CMD);
      outw(TxDisable, ioaddr + EL3_CMD);
      
      if (dev->if_port == 2)
          /* Turn off thinnet power.  Green! */
          outw(StopCoax, ioaddr + EL3_CMD);
      else if (dev->if_port == 1) {
          /* Disable link beat and jabber */
          EL3WINDOW(4);
          outw(0, ioaddr + WN4_MEDIA);
      }
      
      /* Switching back to window 0 disables the IRQ. */
      EL3WINDOW(0);
      /* But we explicitly zero the IRQ line select anyway. */
      outw(0x0f00, ioaddr + WN0_IRQ);
        
      /* Check if the card still exists */
      if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
          update_stats(dev);
    }

    link->open--;
    netif_stop_queue(dev);
    netif_mark_down(dev);
    del_timer(&lp->media);
    if (link->state & DEV_STALE_CONFIG)
      mod_timer(&link->release, jiffies + HZ/20);
    
    MOD_DEC_USE_COUNT;
    
    return 0;
}

/*====================================================================*/

static int __init init_3c589_cs(void)
{
    servinfo_t serv;
    DEBUG(0, "%s\n", version);
    CardServices(GetCardServicesInfo, &serv);
    if (serv.Revision != CS_RELEASE_CODE) {
      printk(KERN_NOTICE "3c589_cs: Card Services release "
             "does not match!\n");
      return -EINVAL;
    }
    register_pccard_driver(&dev_info, &tc589_attach, &tc589_detach);
    return 0;
}

static void __exit exit_3c589_cs(void)
{
    DEBUG(0, "3c589_cs: unloading\n");
    unregister_pccard_driver(&dev_info);
    while (dev_list != NULL)
      tc589_detach(dev_list);
}

module_init(init_3c589_cs);
module_exit(exit_3c589_cs);

Generated by  Doxygen 1.6.0   Back to index